Harman Burn Pot, 1-10-00675

$249.99
SKU 1-10-00675
MPN 1-10-00675

Frequently Bought Together

Description

Harman Burn Pot For Accentra Insert, Advance, P43 & XXV, 1-10-00675

Please see "Compatible Stove" to make sure this is appropriate for your Harman Stove.

The patented Harman burn pot is designed to burn pellet fuel more completely. If the burn pot has been damaged by over firing or warped from an accumulation of ash in the burn pot cavity, you should replace this part.

*Accentra Insert was discontinued in 2012 and became the Accentra 52i, which uses different burnpot.


Replacement For Part Number:
  • 1-10-00675

Compatible Models

    Harman
  • P43
  • P61
  • P61A
  • P68
  • Advance
  • Accentra Insert
  • XXV
  • XXV-TC

Instructions

Assembly Instructions For Harman Burn Pot, 1-10-00675

To replace the burnpot:

  1. Unplug your stove
  2. The igniter is inside if the burnpot. From the rear of the stove, find the yellow and light blue colored wires that are coiled up and secured to the wiring harness. cut the zip ties that hold this collection of wire together. when the burn pot is removed, this is the length of wire that will pass through the stove body as the burn pot is pulled out. If the wires are not free to travel, the burnpot will only move about 4 inches.
  3. Locate and remove the 4 1/2" nuts that secure the burnpot to the feeder weldment threaded rods. You may need a universal joint at the end of your socket wrench to make the connection at the top nuts.
  4. Pull the burnpot assembly forward until the yellow and light blue wires are visible, then disconnect the igniter wires. Now the burn pot is free to come out of the stove
  5. Remove the two 5/16" screws that hold the igniter in to the burnpot and then remove the igniter assembly
  6. If you are replacing your igniter, do this now while the burnpot is free from the stove.
  7. Make sure to run the wires for the igniter through the right-side opening at the rear of the burn pot
  8. Replace your burnpot gasket, make sure your yellow and light blue wires are passing through the hole and through the center of the gasket.
  9. Connect your igniter wires and pull the yellow and light blue wires from the back of the stove so that the disconnects pass backward through the opening. Try to take out as much slack in the igniter wires as possible so that they aren't pinch by the burnpot when it is fit into place. Note: for this part of the job, having another person around to pull the wires as you fit the burnpot in stove is key.
  10. Replace your new burn pot over the threaded rods and tighten down all 4 1/2" hex nuts. You will feel the new gasket compress as you tighten the burnpot down, this is normal. DO NOT PINCH THE IGNITER WIRES WHEN DOING THIS PART
  11. Replace the clean out cover and secure your wires in the rear of the stove.

Helpful Tips

The burnpot is a central part of the Harman Pro Pellet Feed System. Generally, the burn pot weldment doesn't need to be replaced and should last the life of your stove.


Many folks will replace the burnpot if their stove is having problems igniting. In general, slow or missed ignitions are a problem to do with an air leak within the stove and not the burnpot itself. Obviously, if your burn pot has a big hole worn in it or there is a bubble on the burn surface where the metal has changed shape, those are examples that would require a new burnpot.


If you are having delayed ignitions and can verify that they igniter is getting hot;

  1. Tighten the four 1/2" nuts that secure the burnpot.
  2. Replace your door gasket and the ash pan gasket if you have separate doors
  3. 3. Look at your door handle to make sure the components of the handle and the catch on the stove are in working order
  4. Make sure the hopper lid is making a tight seal.



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

If you wish to calculate shipping for an item which does not qualify for free shipping, or if you would like the cost to expedite your order, please do the following. Add the item you want to order to your cart and click here to be taken to the cart page where you can enter your country, state / province, and zip code for an estimate.

Shipping Time Estimations

For information on shipping time estimations, see either the Shipping Information & Transit Times on the cart page, or go to our shipping page.

Read More About Our Shipping Information

Please Note: Due to the COVID-19 emergency, USPS and UPS will not guarantee delivery times on next-day and second-day delivery services. Unfortunately, we will not be able to provide a refund for packages shipped this way which are late. Everyone is trying their best under these circumstances. Thank you for your understanding.

QUESTIONS & ANSWERS

Ask a Question
  • Should I use a flame guard in my accented stove

    If you have a Harman Accenra Insert then, yes, you need to use the flame guide - part number 3-00-03000.
    If you have the freestanding version then you will need to use this flame guide - part number 3-00-08534.
    The function of the flame guide is to distribute the heat evenly over the heat exchanger.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods