Skip to main content
Skip to main content
Product title:

Castle Pellet Stove Exhaust Gasket (6.5" DIA.): 18522

Product rating:
Product price:
$6.99
Product SKU ! 18522
Product MPN ! 18522
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $15.98

Description

Castle Serenity Pellet Stove Exhaust Gasket (6.5" diameter with a 5/8" centered hole).  The exhaust gasket creates an airtight seal between the fans mounting plate and fan housing.  This seal is extremely important!  An improper seal in this area of the stove can cause smoke and exhaust gases to leak out into the room.  It is very important to check this gasket regularly.  

 

 

 

 


Replacement For Part Number:

  • 18522

View Compatible Models

Compatible Models

    Castle

  • HPS09
  • HPS10
  • HPS10IC
  • Serenity

Technical Specs

Outside Diameter 6 1/2"
Hole Diameter 5/8"

Instructions

Install Instructions For Castle Pellet Stove Exhaust Gasket (6.5" DIA.): 18522

Installation Instructions:

1.) Unplug the power from the unit.

2.) Remove the side panel closest to the combustion blower.

3.) Disconnect the 3 wires running to the motor (Pay special attention to the location of the yellow and green ground wire.)

4.) Remove the 4 wing nuts holding the mounting plate in place.

5.) Gently pull out the motor & scrape away any gasket material that may be left sticking to the housing.

6.) Using a small adjustable wrench remove the fan blade retainer nut.

7.) Gently slide the fan blade off the shaft.

8.) Remove the old gasket (Make sure all remnants of the old gasket are removed so the new gasket sits flat against the mounting plate).

9.) Slide the new gasket into place.

10.) Reinstall the fan blade and retainer nut.

11.) Reinstall the motor. Make sure it seats tightly against the housing (Be careful not to damage the fan blade when setting the blower in place).

12.) Reinstall the 4 wingnuts.

13.) Reconnect the 3 wires to the blower (Make sure the yellow and green ground wire is connected to the proper spot on the motor).

14.) Reinstall the side panel and plug in the unit.

Troubleshooting

Helpful Tips:

The majority of all pellet stoves problems are either directly or indirectly related to general maintenance and cleaning issues. Regularly cleaning your stove will allow it to function properly and will extend the life of most of the stove’s components. Airflow plays a huge role in the overall functionality of your stove. As the airflow becomes restricted, the stove loses efficiency. Oftentimes build-up around the exhaust fan can cause a number of issues that mimic a failing motor. Please see ComfortBilt's: Guide to Stove Cleaning for More Information!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Castle Serenity Pellet Stove Exhaust Gasket (6.5" diameter with a 5/8" centered hole).  The exhaust gasket creates an airtight seal between the fans mounting plate and fan housing.  This seal is extremely important!  An improper seal in this area of the stove can cause smoke and exhaust gases to leak out into the room.  It is very important to check this gasket regularly.  

 

 

 

 


Replacement For Part Number:

  • 18522

View Compatible Models

Technical Specs

Outside Diameter 6 1/2"
Hole Diameter 5/8"

Instructions

Install Instructions For Castle Pellet Stove Exhaust Gasket (6.5" DIA.): 18522

Installation Instructions:

1.) Unplug the power from the unit.

2.) Remove the side panel closest to the combustion blower.

3.) Disconnect the 3 wires running to the motor (Pay special attention to the location of the yellow and green ground wire.)

4.) Remove the 4 wing nuts holding the mounting plate in place.

5.) Gently pull out the motor & scrape away any gasket material that may be left sticking to the housing.

6.) Using a small adjustable wrench remove the fan blade retainer nut.

7.) Gently slide the fan blade off the shaft.

8.) Remove the old gasket (Make sure all remnants of the old gasket are removed so the new gasket sits flat against the mounting plate).

9.) Slide the new gasket into place.

10.) Reinstall the fan blade and retainer nut.

11.) Reinstall the motor. Make sure it seats tightly against the housing (Be careful not to damage the fan blade when setting the blower in place).

12.) Reinstall the 4 wingnuts.

13.) Reconnect the 3 wires to the blower (Make sure the yellow and green ground wire is connected to the proper spot on the motor).

14.) Reinstall the side panel and plug in the unit.

Troubleshooting

Helpful Tips:

The majority of all pellet stoves problems are either directly or indirectly related to general maintenance and cleaning issues. Regularly cleaning your stove will allow it to function properly and will extend the life of most of the stove’s components. Airflow plays a huge role in the overall functionality of your stove. As the airflow becomes restricted, the stove loses efficiency. Oftentimes build-up around the exhaust fan can cause a number of issues that mimic a failing motor. Please see ComfortBilt's: Guide to Stove Cleaning for More Information!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Justin M.

Castle Pellet Stove Exhaust Gasket (6.5" DIA.): 18522

K
Keith F.

Comfort Bilt Exhaust Gasket (6.5" DIA.): COMFORTBILT-EXHAUST-GASKET

M
Matthew A.
Perfect fit

Worked great

M
Marc C.
Castle serenity Exhaust gaskiet

I can’t believe how fast I got it I will definitely order from Stove and Grill again for all my needs in the future

M
Mark K.
Fit perfect

Glad they had the gasket in stock and it fit perfectly, ready for another warm winter

12

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Justin M.

Castle Pellet Stove Exhaust Gasket (6.5" DIA.): 18522

K
Keith F.

Comfort Bilt Exhaust Gasket (6.5" DIA.): COMFORTBILT-EXHAUST-GASKET

M
Matthew A.
Perfect fit

Worked great

M
Marc C.
Castle serenity Exhaust gaskiet

I can’t believe how fast I got it I will definitely order from Stove and Grill again for all my needs in the future

M
Mark K.
Fit perfect

Glad they had the gasket in stock and it fit perfectly, ready for another warm winter

12
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid