Hearthstone Phoenix Glass (15-⅝" x 10 ¼"): 96-58605

Hearthstone Wood Stove Glass (Phoenix: 8610, 8611, and 8612).  It is important to periodically inspect the glass and glass gasket on your wood stove to ensure you have a proper seal.  A crack in the glass or a missing / deteriorated gasket could allow smoke or flue gases to enter the room.   

Dimensions: 15-5/8" x 10 1/4".

*Check your dimensions carefully. Several sizes were manufactured. *

A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.

Replacement For Part Number:

• 96-58605

• Install Instructions PDF for Hearthstone 96-58605

Install Instructions:

1.) Open the front door and lift it straight up and off of the stove. Place the door face down on a workbench, table, or another flat surface. If the door has an enamel finish, place a sheet of cardboard or cloth down on the work area to prevent chips or scratches. With the door in this position, apply penetrating oil to each of the glass retention screws.

2.) Using a Phillips screwdriver, remove the 8 screws that hold the retaining clips to the inside of the door and remove the clips.

3.) Carefully remove the old glass and discard it (CAUTION: If the glass is broken, wear gloves when removing it).

4.) Peel the paper backing from a short section of the 3/4" window tape. Apply the tape to the outer edge of the glass, overlapping on each side of the glass. Continue until the glass is completely gasketed. Cut and discard any extra gasket. (IMPORTANT: If the glass you receive is infra-red coated on one side that side MUST be installed on the outside of the stove). This will reflect heat back into the firebox, aid in combustion, and will affect clearances. 5.) Set the gasketed glass back into the door. Position the retention clips and tighten the screws.

6. Reinstall the door on the stove.

Helpful Tips:

If you need to remove the glass or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws/bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten). 

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

This Item Qualifies For Free Shipping With Orders Over $99!