Enerzone Dual Cage Convection Blower Motor Only: 44122-AMP

UPC: 773388005843

Replacement For Part Number:

• 44122

View Compatible Models

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Enerzone

• Destination 1.5 Wood Insert
• Solution 2.5 Wood Fireplace
• Cambridge Pellet Stove

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Enerzone Dual Cage Convection Blower Motor Only: 44122-AMP

Instructional Documents

• Install Instructions PDF for Enerzone 44122

Instructional Notes

1.) Unplug the unit and make sure it is cool to the touch.

2.) Remove the necessary panels from the unit to allow access to the convection blower.

3.) Disconnect the power wires leading to the blower.

4.) Remove the screws attaching the blower housing to the unit. Pay attention to the orientation of the blower and any grommets/spacers. The replacement blower needs to be positioned in the same way!

6.) Position the new blower assembly in place and reinstall the previously removed screws.

7.) Reconnect any previously removed power wires.

8.) Reinstall any previously removed panels and plug in the unit.

Troubleshooting Notes

The distribution blower is the fan responsible for blowing hot air into the room. Many stoves are also equipped with a high-limit sensor. If your high-limit sensor is tripping or you are receiving a high-limit error code on your board, this may indicate that the blower is not moving as much air as it should

If your distribution blower does not seem to be moving the same amount of air as it once did, inspect and clean the blower. Distribution blowers will often draw dust and pet hair into the blades of the fan when operating.

If the blower continues to rotate at a slower speed after it has been cleaned or you hear excessive noise coming from the fan it may need to be replaced.

This Item Qualifies For Free Shipping!