True North Baffle Board for TN19 & TN20 Wood Stoves: 80000619-AMP

Replacement set of two baffle boards for True North wood stoves. Measures 16-5/8" x 15" x 1" overall when mated with shiplap joint.

Baffles in wood stoves and inserts are required to be in good condition to burn efficiently and meet EPA emissions regulations. The baffle, when working correctly, creates a secondary high temperature burn zone to reduce smoke emissions. Over time, it is normal for baffles to deteriorate and they can be easily broken during routine maintenance. Stoves with broken or missing baffles will burn less efficiently, smoke more, and not comply with emissions regulations. To ensure your stove is working efficiently and safely, inspect your baffles yearly and replace them when they have visible damage such as cracking or missing material.

Replacement For Part Numbers:

• 80000619
• TRNO.BAFF

View Compatible Models

True North

• TN19
• TN20
• TN20 Series A
• TN20 Series B

Dimensions (total)

16-5/8" x 15" x 1"

Install Instructions For True North Baffle Board for TN19 & TN20 Wood Stoves: 80000619-AMP

Baffle Removal:

1. With a set of vise-grips, grasp the front baffle tube on the right, slightly away from the baffle air assembly. While squeezing lightly use a hammer to hit the pliers and pull the tube to the right to disengage the tube from the hole on the left. Allow the tube to hang freely from the hole on the right.
2. Repeat step #1 for the second air tube.
3. Grasp the front edge of the left half of the baffle board and tilt up at the back. Guide the board down and through the door opening.
4. Grasp the right half of the baffle board and slide it over to the left.
5. Tilt the back of the board up and guide it down and through the door opening.
6. Reverse the process to replace the baffle assembly.

Baffle Installation:

1. Insert one half of the baffle board above the two back air tubes inside the firebox. Slide it over to the right and allow it to rest on the baffle air assembly.
2. Ensure that the second half is inserted to allow the two cuts of the baffle boards to overlap. Insert the other half of the baffle board and allow it to rest on the left side of the baffle air assembly.
3. With the holes facing upward and the notch to the left side, insert a baffle tube into the hole in the baffle air channel on the right at an angle. Then raise and insert it into the opposite hole on the left side of the baffle assembly.
4. With a set of vise-grips grasp the baffle tube on the left, slightly away from the baffle air assembly. While squeezing tightly, use a hammer to hit the pliers and push the tube to the left to engage the tube in the hole on the left.
5. Repeat steps 3 and 4 with the remaining baffle tubes.
6. Slide the baffle board halves together then separate slightly to ensure there are no gaps on either side of the baffle board.
7. Push baffle board tight against the rear of the firebox.

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

This Item Qualifies For Free Shipping With Orders Over $99!

Learn More About Our Shipping Information