Skip to main content
Skip to main content
Product title:

Breckwell Ceramic Fiber Board: 88146

Product rating:
Product price:
$119.99
Product SKU ! 88146(BRE)
Product MPN ! 88146
Product availability: In Stock
Bullet point features

Description

-Breckwell Wood Stove Ceramic Fiber Board.  The fiber board is an important part of your unit.  This board redirects flue gases inside the stove and increases the temperature of the reburn tubes.  When the tubes become "superheated," they will reburn excess smoke and flue gas increasing your stoves efficiency.

-The board also protects the top of the stove.  If the board is deteriorated or you notice large cracks forming it should be replaced.  You should not burn your stove without a functional baffle board in place! 


Replacement For Part Number:

  • 88146

UPC: 012685881461

Compatible Models

    Breckwell

  • SW2.0
  • SW2100

Technical Specs

Material Superwool Plus Board
Length 10"
Width 22 3/4"
Height 1/2"
Operational Temperature (c) Up To 760° C | 2100°F

Instructions

Install Instructions For Breckwell Ceramic Fiber Board: 88146

1.) Make sure the fire is completely out and your stove is cool to the touch.

2.) Open the main load door.

3.) Locate the retainer clip and bolt on the first reburn tube.

4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board (On some units, you may be able to carefully remove the board without removing any of the tubes).

5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).

6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle).

7.) Slide the old baffle out (If your model has a "Wool Blanket" that will be removed at this time).

8.) Position the new baffle in its place (Make sure the new baffle is positioned correctly. If it is too far forward it may cause issues with the burn).

8.) Reinstall any previously removed tubes, blankets, and retainer clips.

9.) Close the door.

Troubleshooting

-The baffle board is an important part of your stove. The main purpose of this board is to cause the reburn tubes to become superheated. When this happens, unburned smoke and flue gases traveling past the tubes ignite, increasing your stove's efficiency. The board also protects the top of your stove from direct contact with the flame. If your stove is not burning as it should you should check to make sure that the board is positioned correctly.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

-Breckwell Wood Stove Ceramic Fiber Board.  The fiber board is an important part of your unit.  This board redirects flue gases inside the stove and increases the temperature of the reburn tubes.  When the tubes become "superheated," they will reburn excess smoke and flue gas increasing your stoves efficiency.

-The board also protects the top of the stove.  If the board is deteriorated or you notice large cracks forming it should be replaced.  You should not burn your stove without a functional baffle board in place! 


Replacement For Part Number:

  • 88146

UPC: 012685881461

Technical Specs

Material Superwool Plus Board
Length 10"
Width 22 3/4"
Height 1/2"
Operational Temperature (c) Up To 760° C | 2100°F

Instructions

Install Instructions For Breckwell Ceramic Fiber Board: 88146

1.) Make sure the fire is completely out and your stove is cool to the touch.

2.) Open the main load door.

3.) Locate the retainer clip and bolt on the first reburn tube.

4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board (On some units, you may be able to carefully remove the board without removing any of the tubes).

5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).

6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle).

7.) Slide the old baffle out (If your model has a "Wool Blanket" that will be removed at this time).

8.) Position the new baffle in its place (Make sure the new baffle is positioned correctly. If it is too far forward it may cause issues with the burn).

8.) Reinstall any previously removed tubes, blankets, and retainer clips.

9.) Close the door.

Troubleshooting

-The baffle board is an important part of your stove. The main purpose of this board is to cause the reburn tubes to become superheated. When this happens, unburned smoke and flue gases traveling past the tubes ignite, increasing your stove's efficiency. The board also protects the top of your stove from direct contact with the flame. If your stove is not burning as it should you should check to make sure that the board is positioned correctly.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
e
eric b.

US Stove Company Ceramic Fiber Board For Model 2000, 88146

C
Chris F.
Loose fit

Doesn't fit very tight and moves around easily in the stove. Not your fault, just a bad design

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
e
eric b.

US Stove Company Ceramic Fiber Board For Model 2000, 88146

C
Chris F.
Loose fit

Doesn't fit very tight and moves around easily in the stove. Not your fault, just a bad design

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid