Hearthstone Shelburne Wood Stove Glass Installation and Maintenance Kit For 93-58705

Hearthstone Wood Stove Glass (Shelburne 8370).  It is important to periodically inspect the glass and glass gasket on your wood stove to ensure you have a proper seal.  A crack in the glass could lead to smoke and gasses entering your living area.

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 14 total items.

Component Technical Specs

Open a part to see its specifications.

1 xHarman Glass Gasket 3/16 x 10' with self adhesive fits the Accentra 52i, XXV, & Accentra Insert. 1-00-1186258229

SKU 3110-053 (opens in new tab)

Quantity In Kit	1
Length (in)	120"
Width (in)	¼"
Height (in)	¼"
Outer Diameter (in)	¼"
Thickness (in)	¼"
Is self adhesive	Yes
Material	Fiberglass
Color	Black
Weight	1.25 oz

6 xHearthStone Machine Screw 8-32x3/8”

SKU 4500-3430 (opens in new tab)

Quantity In Kit	6
Length (in)	⁵⁄₁₆"
Width (in)	³⁄₁₆"
Height (in)	³⁄₁₆"
Weight	.25 oz

6 xHearthStone Wood Stove Glass Clip Gasket

SKU 3120-021 (opens in new tab)

Quantity In Kit	6
Length (in)	1"
Width (in)	⅜"
Height (in)	.1"
Weight	0.25 oz

1 xConditioning Glass Cleaner

SKU GLASS CLEANER 4oz (opens in new tab)

Quantity In Kit	1
Length (in)	5.425"
Width (in)	2 ½"
Height (in)	1.150"
Volume	4 fl oz. (120 ml)
Weight	6.25 oz

Install Instructions For Hearthstone Shelburne Wood Stove Glass Installation and Maintenance Kit For 93-58705

Instructional Documents

• Install Instructions PDF for Hearthstone Shelburne Wood Stove Glass Installation and Maintenance Kit For 93-58705

Instructional Notes

Glass Replacement Instruction (Shelburne 8370 & 8371):

1.) Open the front door and pull it straight up and off the stove. Retain the hinge pins and washers for reassembly. Lay the door face down on a table or workbench (Protect enamel surfaces with a soft cloth or a layer of cardboard).

2. To change the glass, first, remove the 6 screws that hold the glass retention clips in place with a Phillips screwdriver (Retain the clips for reassembly). Wear work gloves and carefully remove the damaged glass and discard it.

3. Pull out the used ¼” rope that was under the glass. Clean the channel with a wire brush. Wipe the channel with a damp cloth. Apply gasket adhesive (If the new gasket has a peel-off adhesive back no additional cement or silicone is necessary). Peel the paper backing from the new ¼” gasket and press it into place in the gasket channel, placing the adhesive side into the channel.

4. Inspect the new piece of glass and look for the word “coated”, or a white sticker. This is the Infra-Red coated side and must be placed outside the firebox. Carefully set the glass on the door and secure it with the clips and new screws. (Note: new gasket sections are provided as a cushion between the clips and glass).

5. Place the door back onto the stove with the washers between the hinge tabs. Insert the pins and close the door.

Troubleshooting Notes

Helpful Tips:

If you need to remove the glass or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws/bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten). 

This Item Qualifies For Free Shipping With Orders Over $99!