Ashley Wood/Coal Furnace Cast Iron Shaker Grate for the 22AF. The shaker grate is an important part of your furnace. Air passes through the bottom of the grate to the base of the fire. Rotating the handle position will agitate the coals and allow ash to drop into the lower pan. It is important to inspect the grates periodically. If you notice that the grates are warping or starting to burn out they should be replaced!
Install Instructions For Ashley Cast Iron Shaker Grate (22AF): 40257
Shaker Grate Replacement:
1.) Open the main load door.
2.) Remove the smoke curtain/shield. This will require you to loosen the two bolts above the main load door. (Doing this will give you easier access to the interior of the furnace).
3.) Remove the front and back liner (This will likely require you to remove some of the interior firebricks. Pay attention to the position of the firebrick).
4.) Next, open the ash pan door.
5.) Pull the shaker frame and shaker grate forward and out of the unit (You may have more than one frame and grate).
6.) Place the shaker frame on a flat surface and remove the shaker grate from the frame by sliding it out of the groves (If the grate or frame is warped it may be helpful to gently tap the grate with a hammer to dislodge it from the frame).
7.) Now grab your new shaker grate or frame and place the pieces together (Fit them together the same way the original pieces were previously installed).
8.) Slide the grate or grates back into position (It is important to make sure the grates are positioned correctly. Make sure that the long, narrow end of the grate is facing you and that the first grate is pushed all the way to the back of the unit. The grate will not work properly if it is installed backward). If you have two grates they should meet and connect in the middle.
9.) Before closing your ash pan door attach your shaker handle and make sure that the grates are able to move freely. Shut the ash pan door.
10.) Reinstall any previously removed liners and firebrick.
11.) Reattach the smoke curtain/shield if previously removed and tighten the bolts.
Troubleshooting
Shaker Grate Operation / Info:
-Shake the grates vigorously 1/2" from left to right to spill ashes into the ash pan (Do this at least once every 12 hours of operation).
-Rotation of the handle (5 o'clock to 7 o'clock) position will agitate coals and spill ashes into the ash pan. It is advisable for you to get familiar with the shaker grate operation before firing the unit!
-Empty the ash pan regularly. Do not allow ashes to build up to the grate. This could cause the grate to warp and burn out. In addition, you might spill the ashes when removing the pan.
-If you notice that the grates are warped they should be replaced!
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Information
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Ashley Wood/Coal Furnace Cast Iron Shaker Grate for the 22AF. The shaker grate is an important part of your furnace. Air passes through the bottom of the grate to the base of the fire. Rotating the handle position will agitate the coals and allow ash to drop into the lower pan. It is important to inspect the grates periodically. If you notice that the grates are warping or starting to burn out they should be replaced!
Install Instructions For Ashley Cast Iron Shaker Grate (22AF): 40257
Shaker Grate Replacement:
1.) Open the main load door.
2.) Remove the smoke curtain/shield. This will require you to loosen the two bolts above the main load door. (Doing this will give you easier access to the interior of the furnace).
3.) Remove the front and back liner (This will likely require you to remove some of the interior firebricks. Pay attention to the position of the firebrick).
4.) Next, open the ash pan door.
5.) Pull the shaker frame and shaker grate forward and out of the unit (You may have more than one frame and grate).
6.) Place the shaker frame on a flat surface and remove the shaker grate from the frame by sliding it out of the groves (If the grate or frame is warped it may be helpful to gently tap the grate with a hammer to dislodge it from the frame).
7.) Now grab your new shaker grate or frame and place the pieces together (Fit them together the same way the original pieces were previously installed).
8.) Slide the grate or grates back into position (It is important to make sure the grates are positioned correctly. Make sure that the long, narrow end of the grate is facing you and that the first grate is pushed all the way to the back of the unit. The grate will not work properly if it is installed backward). If you have two grates they should meet and connect in the middle.
9.) Before closing your ash pan door attach your shaker handle and make sure that the grates are able to move freely. Shut the ash pan door.
10.) Reinstall any previously removed liners and firebrick.
11.) Reattach the smoke curtain/shield if previously removed and tighten the bolts.
Troubleshooting
Shaker Grate Operation / Info:
-Shake the grates vigorously 1/2" from left to right to spill ashes into the ash pan (Do this at least once every 12 hours of operation).
-Rotation of the handle (5 o'clock to 7 o'clock) position will agitate coals and spill ashes into the ash pan. It is advisable for you to get familiar with the shaker grate operation before firing the unit!
-Empty the ash pan regularly. Do not allow ashes to build up to the grate. This could cause the grate to warp and burn out. In addition, you might spill the ashes when removing the pan.
-If you notice that the grates are warped they should be replaced!
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Info
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
