Install Instructions For Ashley Glass for APC1406 & APCI1406: 891131
1.) Make sure your stove is completely shut down and cool to the touch.
2.) Open the main door.
3.) Using a screwdriver remove the screws holding the top retainer in place.
4.) Loosen the screws holding the bottom retainer in place (Normally you will not need to completely remove this retainer).
5.) Gently remove the glass by letting it tip back (Pay attention to how the gasket is placed on the glass).
6.) Install the gasket around the new glass in the same manner as the original gasket was installed on the old glass (If your new glass comes with the gasket installed skip this step).
7.) Slide the new glass into the bottom retainer on the door and gently tighten the screws.
8.) Place the screws and washers back into the top retainer.
9.) Position the top retainer back in place and tighten the screws (Do not over-tighten).
10.) Make sure to wipe any marks off the glass prior to burning the stove.