Breckwell SW4100 Wood Stove Glass Kit

Replacement Breckwell Wood Stove Door Glass Kit for SW4100 wood stoves. The kit includes the glass 891813, gasket 88174, top and bottom glass retainers 25465, hardware and glass cleaner.

A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.

Replacement For Part Number:

• 891813

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 2 total items.

Component Technical Specs

Open a part to see its specifications.

1 xAshley AC2000 / AWC31 Replacement Glass

SKU 891813(BRE)-AMP (opens in new tab)

Quantity In Kit	1
Length (in)	14 ½"
Thickness (in)	0.19"
Max Temp (F)	1400
Maximum Height	9"
Maximum Length	14-1/2"

1 xAshley Glass Installation Kit For 891813

SKU INSTALLATION KIT FOR 40564 (BRE) (opens in new tab)

Quantity In Kit	1

Install Instructions For Breckwell SW4100 Wood Stove Glass Kit

Instructional Notes

1.) Make sure your stove is completely shut down and cool to the touch.

2.) Open the main door.

3.) Using a screwdriver remove the screws holding the top retainer in place.

4.) Loosen the screws holding the bottom retainer in place (Normally you will not need to completely remove this retainer).

5.) Gently remove the glass by letting it tip back (Pay attention to how the gasket is placed on the glass).

6.) Install the gasket around the new glass in the same manner as the original gasket was installed on the old glass (If your new glass comes with the gasket installed skip this step).

7.) Slide the new glass into the bottom retainer on the door and gently tighten the screws.

8.) Place the screws and washers back into the top retainer.

9.) Position the top retainer back in place and tighten the screws (Do not over-tighten).

10.) Make sure to wipe any marks off the glass prior to burning the stove.

"Click here for more information!"

Troubleshooting Notes

-It is important to periodically inspect the glass on your unit. If you notice black or brown streaks on certain areas of the glass it may indicate that there is an air leak. Often times a leak in this area can be fixed by gently snugging the retainer screws or by replacing the gasket. If the glass is cracked or has an excessively heavy haze (Cloudy appearance) the glass should be replaced.

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

This Item Qualifies For Free Shipping!