Skip to main content
Flash Sale Live [ UP TO 35% OFF SITE WIDE! ] No Discount Code Necessary Free shipping on orders over $99* 90-Day Warranty Included Flash Sale Live [ UP TO 35% OFF SITE WIDE! ] No Discount Code Necessary 90-Day Warranty Included
Product title:

Enviro Halogen Pin Igniter (Pre 2004): EF-127-AMP

Enviro Halogen Pin Igniter (Pre 2004): EF-127-AMP

Have a Question? Contact Us 24/7 to Ask a Specialist

Product rating:
Product price:
Save 15%
$49.99
$42.49

$204.00 less than the OEM

Product SKU ! EF-127-AMP
Product MPN ! EF-127
Product availability: In Stock
Bullet point features

Pay over time with Affirm.

Have a Question? Contact Us 24/7 to Ask a Specialist

You are viewingAftermarket (AMP)Saves $204.00 vs the OEM Consider insteadOEM
Enviro Halogen Pin Igniter (Pre 2004): EF-127-AMPRelated Product Title Enviro Halogen Pin Igniter (Pre 2004): EF-127
$42.49In stockRelated Product Price: $289.99 $246.49In stock
Related Product Ratings:

Description

Genuine Enviro Replacement 115V Pin Ignitor for Select Enviro Pellet Stoves Made Prior to 2004, See Compatible.

Note: This igniter was used on the listed compatible models from 8/94 to 12/03. In 2004, the manufacturer changed from this halogen pin style igniter over to a new cartridge and wire style version. If you'd like to upgrade to new style igniter, please order part 50-1067.

Dimensional Note: The length from flange to end of ignitor tube going into burn out area: 2-9/16"

Replacement For Part Number:

  • EF-127

Compatible Models

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Enviro

Technical Specs

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Length (in) 6 ¾"
Width (in) 2"
Height (in) 1 ¼"
Voltage 115
Wire Connector Notes 2-Pin Halogen Connector
Weight 6.00 oz

Wiring and Connectors

Wire, terminals and connectors for the job, in case yours are worn or the ones you have do not reach.

Instructions

Install Instructions For Enviro Halogen Pin Igniter (Pre 2004): EF-127-AMP

Instructional Documents

Instructional Notes

This igniter plugs into to a socket, known as the halogen pin socket. The pins from this part most likely will not self align. Prior to removing the the igniter the intake box located under the auger motor must be removed and the halogen pin socket leads need to be free from the wire harness so that when the igniter is removed, the halogen socket travels with the igniter through the front of the stove so it can be plugged in. Either pin may attach into either hole. Reinstall the igniter and then take up the wire slack in the back to prevent the socket pin wires from touching the exposed igniter tube.

Troubleshooting

Troubleshooting Notes

****This igniter ONLY exists is Enviro and Vista Flame stoves and inserts made PRIOR to 2004****

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Customers Also Bought

Parts that customers who bought this one also ordered, the most popular first.

  • SKU
    MPN
    EF-015-AMP-1
    EF-015
    $21.24
    $24.99
    Enviro Ceramic L120 Ignition Temp Sensor: EF-015

    Enviro Ceramic L120 Ignition Temp Sensor: EF-015

    Open 100°/120°/Normally Closed Ceramic
    View The OEM
  • SKU
    EF-045-AMP
    $49.99
    Enviro Fan Controller Rheostat with Knob (115V): EF-045-AMP

    Enviro Fan Controller Rheostat with Knob (115V): EF-045-AMP

    View The OEM
  • SKU
    EF-037-AMP
    $101.99
    $119.99
    Enviro Power Up Timer Control (115V): EF-037-AMP

    Enviro Power Up Timer Control (115V): EF-037-AMP

    View The OEM
  • SKU
    EF-006
    $5.99
    Enviro Square Convection Blower Gasket: EF-006

    Enviro Square Convection Blower Gasket: EF-006

  • SKU
    EF-130-AMP
    $110.49
    $129.99
    Enviro Steel Brick Lining (50-2336): EF-130-AMP

    Enviro Steel Brick Lining (50-2336): EF-130-AMP

    View The OEM
  • SKU
    EF-012
    $7.99
    Enviro Round Combustion Blower Housing Gasket 6" Round

    Enviro Round Combustion Blower Housing Gasket 6" Round

  • SKU
    50-474-AMP
    $67.99
    $79.99
    Enviro Stainless Steel Burn Pot Liner: 50-474-AMP

    Enviro Stainless Steel Burn Pot Liner: 50-474-AMP

    Stainless Steel
    View The OEM
  • SKU
    EF-050
    $25.49
    $29.99
    Enviro Slider Damper Rod with Knob: EF-050

    Enviro Slider Damper Rod with Knob: EF-050

  • SKU
    SP4L-101-4
    $129.99
    Enviro Combustion Blower Motor Only: EF-161-AMP

    Enviro Combustion Blower Motor Only: EF-161-AMP

    115V / 1.6A 3000 RPM
    View The OEM
  • SKU
    PP7905-2
    $25.49
    $29.99
    Enviro Impeller, Blower Wheel for Convection Blowers (3.75"): EF-004-AMP

    Enviro Impeller, Blower Wheel for Convection Blowers (3.75"): EF-004-AMP

    Replaces EF-004
    View The OEM
  • SKU
    EF-051
    $17.99
    $19.99
    Enviro Heat Exchanger Rod with Knob: EF-051

    Enviro Heat Exchanger Rod with Knob: EF-051

  • SKU
    SP4L-151-2
    $195.49
    $229.99
    Enviro Convection Blower By Fasco: EF-002-AMP

    Enviro Convection Blower By Fasco: EF-002-AMP

    115V / 1.5A 3000 RPM
    View The OEM

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for special parts may take up to 4 weeks for processing, and customers are responsible for return shipping charges.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Learn More About Our Shipping Information

Questions & Answers

If your question does not concern this part, contact us directly or read our FAQs.

No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.

Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
Gary F.
Pellet stove

Very professional very helpful product fit like it was supposed to shipping was right on time will do business again

C
Craig M.
Great price and speedy shipping!!

I purchase an igniter for an older pellet stove. It was easy to find the right one and they shipped it quick.

J
Jerry S.

Enviro and Vista Flame Igniter for Pre-2004 EF2 & EF3 Models, Pre-2004 VF100 Models # EF-127-AMP

l
lawrence h.
Awesome sauce

fast shipping, great price, Amp looks of good quality, can't wait to try it.

Still have a question?

Call or email us and we will help you find the right part.

Contact us 1-508-392-9831
Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQs

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
Gary F.
Pellet stove

Very professional very helpful product fit like it was supposed to shipping was right on time will do business again

C
Craig M.
Great price and speedy shipping!!

I purchase an igniter for an older pellet stove. It was easy to find the right one and they shipped it quick.

J
Jerry S.

Enviro and Vista Flame Igniter for Pre-2004 EF2 & EF3 Models, Pre-2004 VF100 Models # EF-127-AMP

l
lawrence h.
Awesome sauce

fast shipping, great price, Amp looks of good quality, can't wait to try it.