Hearthstone Phoenix Wood Stove Glass Maintenance & Installation Kit For 96-58605

Hearthstone Wood Stove Glass Installation and Maintenance Kit for Phoenix: 8610, 8611, and 8612.  It is important to periodically inspect the glass glass gasket on your wood stove to ensure you have a proper seal.  A missing / deteriorated gasket could allow smoke or flue gases to enter the room.   

Includes the following parts:

• 1 x Gasket: Tape 3/4" Adhesive Backed   (#3160-080)
• 8 x Screw, Machine 10-24x3/8” (#4500-2105)
• 8 x Glass Clips (#5021-060)
• 1 x Glass Cleaner

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 18 total items.

Component Technical Specs

Open a part to see its specifications.

1 x3/4" FLAT GASKET WITH ADHESIVE

SKU 3160-080 (opens in new tab)

Quantity In Kit	1
Length (in)	137"
Width (in)	¾"
Height (in)	¼"
Is self adhesive	Yes
Material	Fiberglass With Graphite Coating
Weight	4.25 oz

8 xHearthStone Machine Screw 10-24x3/8”

SKU 4500-2105 (opens in new tab)

Quantity In Kit	8
Length (in)	⅜"
Width (in)	⁵⁄₁₆"
Height (in)	⁵⁄₁₆"
Weight	0.25 oz

8 xHearthStone Wood Stove Glass Clip

SKU 5021-060 (opens in new tab)

Quantity In Kit	8
Length (in)	1"
Width (in)	⅞"
Height (in)	⅛"
Weight	.25 oz

1 xConditioning Glass Cleaner

SKU GLASS CLEANER 4oz (opens in new tab)

Quantity In Kit	1
Length (in)	5.425"
Width (in)	2 ½"
Height (in)	1.150"
Volume	4 fl oz. (120 ml)
Weight	6.25 oz

Install Instructions For Hearthstone Phoenix Wood Stove Glass Maintenance & Installation Kit For 96-58605

Instructional Documents

• Install Instructions PDF for Hearthstone Phoenix Wood Stove Glass Maintenance & Installation Kit For 96-58605

Instructional Notes

Install Instructions:

1.) Open the front door and lift it straight up and off of the stove. Place the door face down on a workbench, table, or another flat surface. If the door has an enamel finish, place a sheet of cardboard or cloth down on the work area to prevent chips or scratches. With the door in this position, apply penetrating oil to each of the glass retention screws.

2.) Using a Phillips screwdriver, remove the 8 screws that hold the retaining clips to the inside of the door and remove the clips.

3.) Carefully remove the old glass and discard it (CAUTION: If the glass is broken, wear gloves when removing it).

4.) Peel the paper backing from a short section of the 3/4" window tape. Apply the tape to the outer edge of the glass, overlapping on each side of the glass. Continue until the glass is completely gasketed. Cut and discard any extra gasket. (IMPORTANT: If the glass you receive is infra-red coated on one side that side MUST be installed on the outside of the stove). This will reflect heat back into the firebox, aid in combustion, and will affect clearances. 5.) Set the gasketed glass back into the door. Position the retention clips and tighten the screws.

6. Reinstall the door on the stove.

Troubleshooting Notes

Helpful Tips:

If you need to remove the glass or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws/bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten). 

This Item Qualifies For Free Shipping With Orders Over $99!