Skip to main content
Skip to main content
Product title:

Hearthstone Manchester 8360 Glass (18 ⅝" x 12 ⅛"): 93-58300-AMP

Product rating:
Product price:
$149.99

A $300.00 Savings over the OEM

Product SKU ! 93-58300-AMP
Product MPN ! 93-58300
Only 6 Left In Stock
Bullet point features

Frequently Bought Together

Total Price: $204.97

Description

Hearthstone Wood Stove Glass (Manchester 8360).  It is important to periodically inspect the glass and glass gasket on your wood stove to ensure you have a proper seal.  A crack in the glass or a missing / deteriorated gasket could allow smoke or flue gases to enter the room.     

Measurements: 18 5/8" x 12 1/8"

*Check your dimensions carefully to confirm compatibility! * . Several sizes were manufactured.


A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.



Replacement For Part Numbers:

  • 93-58300
  • 3030-059

Compatible Models

    Hearthstone

  • Manchester 8330
  • Manchester II
  • Manchester

Technical Specs

Maximum Height 12-1/8" (308 mm)
Maximum Length 18-5/8" (473 mm)
Height On Right Side of Arch 11-1/2" (292 mm)
Height On Left Side of Arch 11-1/2" (292 mm)
Thickness 3/16" (4.78 mm)
Gasket NOT Included

Videos

Instructions

Install Instructions For Hearthstone Manchester 8360 Glass (18 ⅝" x 12 ⅛"): 93-58300-AMP

Instructions:

1. Prepare a smooth and sturdy work surface large enough to accommodate the front door of your stove. Cover the surface in cardboard or soft fabric to prevent damage to your door finish during this procedure.

2. Remove the two 10-24 acorn nuts and washers attaching the top casting to the body of the stove using the 3/8” wrench.

3. Place two 10” pieces of 2”x4” wood or thick cardboard strips on a diagonal between the top casting and the top of the stove body at the back two corners (This is to prevent chipping on enamel stoves).

4. Gently lift the leading (front) edge of the top casting and prop it up from the firebox with an additional 10” piece of 2”x4”. Be careful to position this prop in the center of the top casting leading edge and on the flat portion of the firebox top. Do not prop on firebox heat fins. The top casting should now be at an angle with the back edge resting on the stove body.

5. Look along the front edge of the now exposed firebox for the two Front Grill mounting studs. They will be located at the far right and left edges of the grill and will hold it to the body of the stove by sliding into two prominent cast slots on the firebox and fastening with a 1/4” nut and washer. Using the 7/16” wrench, loosen these two nuts. It is not necessary to remove them entirely.

6. Gently lift the Front Grill from the body of the stove and set it aside being careful not to damage the finish.

7. Open the front door to about 3/4 of full travel.

8. Stand facing the front side of the door with your right hand close to the hinge side and your left to the front door latch side. With an underhanded grip on your right hand, firmly grab the door face bottom rail. Grip the door face rail on the latch side with your left hand and gently but firmly raise the door straight vertically up until it is free from the hinge pivots. Once the door is free from the hinges it may move suddenly. Take care not to allow the door to contact the stove and potentially damage the finish.

9. Place the door face down on the prepared work surface.

10. With the door in this position, apply penetrating oil to each of the glass retention screws.

11. Using the #2 Phillips screwdriver, remove the 8 screws that hold the retaining clips to the inside of the door.

12. Remove the loose clips and fiber pads.

13. Carefully remove the old glass and gasket and discard them. CAUTION: If the glass is broken, remove the glass with work gloves. Make certain all glass debris is cleaned from the door.

14. Locate the end of the existing Front Door Glass Gasket. This should be situated between the hinge pivots on the hinge side of the door.

15. Grip one end of the existing rope gasket and gently pull the entire unit from the door frame. Discard the used gasket material. 16. Thoroughly clean the gasket channel using steel wool or a small wire brush. Wipe the channel clean with a damp rag or cloth.

17. Peel the paper backing from a short section of the 1/4” self-adhesive rope gasket. Beginning at a position centered between the two hinge pivot projections, gently press the adhesive side of the rope gasket into the recessed gasket channel until it adheres to the floor of the groove (see Figure 3 for starting position). Continue peeling back the paper backing and pressing the new gasket adhesive side down into the gasket channel around the entire perimeter of the glass opening. Be careful not to stretch the gasket material during this process. When you have returned to your starting point, cut the rope gasket at such a location that the ends meet with no gap. Discard any extra gasket.

18. Set the new ceramic glass panel onto the door with the white label facing the outside of the door (refer to the Before You Begin section of this document). Center the glass on the opening

19. Position the 8 new fiber pads on the glass panel parallel to the glass edge at each retention clip mounting screw location.

20. Position the 8 new retention clips over each fiber pad as shown in Figure 2.

21. Insert the 8 new screws through the glass retention clips and lightly snug the screws in a clockwise pattern around the perimeter of the door.

22. Once all screws are in place, fully tighten them again is a clockwise pattern making sure the fiber pads stay centered under the clips.

23. Return the door to the stove and gently slide the door hinges back over the hinge pins

24. Carefully slide the Front Grill studs back into the mounting slots, assure the washers are on the back side of the slot tabs (touching the nuts), and re-snug the retaining nuts.

25. Remove the prop device installed in step 4 above and gently lay the leading edge of the top casting back down on the top of the stove body.

26. Remove the wood or cardboard inserted in step 3 above and gently return the top casting to its original position on the stove body.

27. Reinstall and tighten the washers and acorn nuts removed in step 2 above

Click on the instructions link below for more information!

Troubleshooting

Helpful Tips:

If you need to remove the glass or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws / bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten). 


Warranty

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Hearthstone Wood Stove Glass (Manchester 8360).  It is important to periodically inspect the glass and glass gasket on your wood stove to ensure you have a proper seal.  A crack in the glass or a missing / deteriorated gasket could allow smoke or flue gases to enter the room.     

Measurements: 18 5/8" x 12 1/8"

*Check your dimensions carefully to confirm compatibility! * . Several sizes were manufactured.


A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.



Replacement For Part Numbers:

  • 93-58300
  • 3030-059

Technical Specs

Maximum Height 12-1/8" (308 mm)
Maximum Length 18-5/8" (473 mm)
Height On Right Side of Arch 11-1/2" (292 mm)
Height On Left Side of Arch 11-1/2" (292 mm)
Thickness 3/16" (4.78 mm)

Instructions

Assembly Instructions For Hearthstone Manchester 8360 Glass (18 ⅝" x 12 ⅛"): 93-58300-AMP

Instructions:

1. Prepare a smooth and sturdy work surface large enough to accommodate the front door of your stove. Cover the surface in cardboard or soft fabric to prevent damage to your door finish during this procedure.

2. Remove the two 10-24 acorn nuts and washers attaching the top casting to the body of the stove using the 3/8” wrench.

3. Place two 10” pieces of 2”x4” wood or thick cardboard strips on a diagonal between the top casting and the top of the stove body at the back two corners (This is to prevent chipping on enamel stoves).

4. Gently lift the leading (front) edge of the top casting and prop it up from the firebox with an additional 10” piece of 2”x4”. Be careful to position this prop in the center of the top casting leading edge and on the flat portion of the firebox top. Do not prop on firebox heat fins. The top casting should now be at an angle with the back edge resting on the stove body.

5. Look along the front edge of the now exposed firebox for the two Front Grill mounting studs. They will be located at the far right and left edges of the grill and will hold it to the body of the stove by sliding into two prominent cast slots on the firebox and fastening with a 1/4” nut and washer. Using the 7/16” wrench, loosen these two nuts. It is not necessary to remove them entirely.

6. Gently lift the Front Grill from the body of the stove and set it aside being careful not to damage the finish.

7. Open the front door to about 3/4 of full travel.

8. Stand facing the front side of the door with your right hand close to the hinge side and your left to the front door latch side. With an underhanded grip on your right hand, firmly grab the door face bottom rail. Grip the door face rail on the latch side with your left hand and gently but firmly raise the door straight vertically up until it is free from the hinge pivots. Once the door is free from the hinges it may move suddenly. Take care not to allow the door to contact the stove and potentially damage the finish.

9. Place the door face down on the prepared work surface.

10. With the door in this position, apply penetrating oil to each of the glass retention screws.

11. Using the #2 Phillips screwdriver, remove the 8 screws that hold the retaining clips to the inside of the door.

12. Remove the loose clips and fiber pads.

13. Carefully remove the old glass and gasket and discard them. CAUTION: If the glass is broken, remove the glass with work gloves. Make certain all glass debris is cleaned from the door.

14. Locate the end of the existing Front Door Glass Gasket. This should be situated between the hinge pivots on the hinge side of the door.

15. Grip one end of the existing rope gasket and gently pull the entire unit from the door frame. Discard the used gasket material. 16. Thoroughly clean the gasket channel using steel wool or a small wire brush. Wipe the channel clean with a damp rag or cloth.

17. Peel the paper backing from a short section of the 1/4” self-adhesive rope gasket. Beginning at a position centered between the two hinge pivot projections, gently press the adhesive side of the rope gasket into the recessed gasket channel until it adheres to the floor of the groove (see Figure 3 for starting position). Continue peeling back the paper backing and pressing the new gasket adhesive side down into the gasket channel around the entire perimeter of the glass opening. Be careful not to stretch the gasket material during this process. When you have returned to your starting point, cut the rope gasket at such a location that the ends meet with no gap. Discard any extra gasket.

18. Set the new ceramic glass panel onto the door with the white label facing the outside of the door (refer to the Before You Begin section of this document). Center the glass on the opening

19. Position the 8 new fiber pads on the glass panel parallel to the glass edge at each retention clip mounting screw location.

20. Position the 8 new retention clips over each fiber pad as shown in Figure 2.

21. Insert the 8 new screws through the glass retention clips and lightly snug the screws in a clockwise pattern around the perimeter of the door.

22. Once all screws are in place, fully tighten them again is a clockwise pattern making sure the fiber pads stay centered under the clips.

23. Return the door to the stove and gently slide the door hinges back over the hinge pins

24. Carefully slide the Front Grill studs back into the mounting slots, assure the washers are on the back side of the slot tabs (touching the nuts), and re-snug the retaining nuts.

25. Remove the prop device installed in step 4 above and gently lay the leading edge of the top casting back down on the top of the stove body.

26. Remove the wood or cardboard inserted in step 3 above and gently return the top casting to its original position on the stove body.

27. Reinstall and tighten the washers and acorn nuts removed in step 2 above

Click on the instructions link below for more information!

Troubleshooting

Helpful Tips:

If you need to remove the glass or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws / bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten). 


Warranty

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jordan O.D.

Hearthstone Wood Stove Glass (Manchester 8360): 93-58300-AMP

E
East T.J.
Perfect Replacement Great Price

Perfect replacement, cost less than other sites. Fast shipping.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jordan O.D.

Hearthstone Wood Stove Glass (Manchester 8360): 93-58300-AMP

E
East T.J.
Perfect Replacement Great Price

Perfect replacement, cost less than other sites. Fast shipping.