Install Instructions For Hearthstone Phoenix Wood Stove Glass Maintenance & Installation Kit For 96-58605
Install Instructions:
1.) Open the front door and lift it straight up and off of the stove. Place the door face down on a workbench, table, or another flat surface. If the door has an enamel finish, place a sheet of cardboard or cloth down on the work area to prevent chips or scratches. With the door in this position, apply penetrating oil to each of the glass retention screws.
2.) Using a Phillips screwdriver, remove the 8 screws that hold the retaining clips to the inside of the door and remove the clips.
3.) Carefully remove the old glass and discard it (CAUTION: If the glass is broken, wear gloves when removing it).
4.) Peel the paper backing from a short section of the 3/4" window tape. Apply the tape to the outer edge of the glass, overlapping on each side of the glass. Continue until the glass is completely gasketed. Cut and discard any extra gasket. (IMPORTANT: If the glass you receive is infra-red coated on one side that side MUST be installed on the outside of the stove). This will reflect heat back into the firebox, aid in combustion, and will affect clearances. 5.) Set the gasketed glass back into the door. Position the retention clips and tighten the screws.
6. Reinstall the door on the stove.
