Install Instructions For Lopi AGP Combustion Blower Motor: 250-02610-AMP
Installation Instructions:
1.) Unplug the power from the unit.
2.) Remove the side panel closest to the combustion blower.
3.) Disconnect the wires running to the motor.
4.) Remove the wing nuts holding the mounting plate in place.
5.) Gently pull out the motor & scrape away any gasket material that may be left sticking to the housing.
6.) Install the new motor. Make sure it seats tightly against the housing (Be careful not to damage the fan blade when setting the blower in place).
7.) Reinstall the wingnuts.
8.) Reconnect the wires to the blower.
9.) Reinstall the side panel and plug in the unit.