Install Instructions For Quadra-Fire Pumice Firebrick (9" x 4.5" x 1.25"): 832-3040
Before removing any firebrick, please review the brick diagram for your model.
1.) Start off by laying out your new firebrick on the floor. It is helpful to lay out each side individually and compare it to the bricks inside the stove (i.e rear, right side, left side, bottom).
2.) Inspect the firebox to see if there are any brick retainers that need to be removed. If so remove them at this time.
3.) Remove the existing firebrick. Pay attention to how the bricks come out. Most of the time the firebricks on the side and rear need to be removed before the brick on the bottom can come out.
4.) Install the new firebrick. These bricks will be installed in the reverse order in which they were removed.
5.) Reinstall any previously removed retainers.