Quadra-Fire Discovery III & 4300 M-ACC Complete Brick Kit: SRV7037-003

Complete Replacement Firebrick Assembly For Quadra-Fire Discovery III and 4300 ACC Millennium Wood Stoves. Includes the following bricks:

UPC: 652174493364

Replacement For Part Number:

• SRV7037-003

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 20 total items.

Component Technical Specs

Open a part to see its specifications.

12 x(PP1901)Pumice Firebrick For Stoves and Fireplaces (9" x 4.5" x 1.25")

SKU 832-0550 (opens in new tab)

Quantity In Kit	12
Length (in)	9"
Width (in)	4 ½"
Height (in)	1 ¼"
Thickness (in)	1 ¼"
Material	Pumice
Characteristic	Standard
Weight	1.75 lbs

4 xPumice Firebrick For Stoves and Fireplaces (6" x 4.5" x 1.25")

SKU SRV7128-002 (opens in new tab)

Quantity In Kit	4
Length (in)	6"
Width (in)	4 ½"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Standard

1 xPumice Firebrick With Angles For Stoves and Fireplaces (9" x 4.5" x 1.25)

SKU PUMICE-BRICK-80 (opens in new tab)

Quantity In Kit	1
Length (in)	9"
Width (in)	4 ½"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle

1 xPumice Firebrick With Angle For Stoves and Fireplaces (9" x 3" x 1.25)

SKU PUMICE-BRICK-79 (opens in new tab)

Quantity In Kit	1
Length (in)	9"
Width (in)	3"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle

2 x(PP1907)Pumice Firebrick For Stoves and Fireplaces (9" x 2" x 1.25")

SKU SRV7128-018 (opens in new tab)

Quantity In Kit	2
Length (in)	9"
Width (in)	2"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Standard
Weight	12.5 oz

Install Instructions For Quadra-Fire Discovery III & 4300 M-ACC Complete Brick Kit: SRV7037-003

Instructional Documents

• Install Instructions PDF for Quadra-Fire SRV7037-003

Instructional Notes

1. After the coals have completely cooled, remove all old brick and ash from unit and vacuum firebox.

2. Remove new brick set from box and lay out to diagram shown.

3. Lay bottom bricks in unit.

4. Install rear bricks on the top of the bottom bricks. Slide top of bricks under clip on back of firebox wall and push bottom of brick back.

5. Install side bricks. Slide top of brick under clips on side

of firebox and push the bottom of the brick until it is flush with the side of the appliance.

Troubleshooting Notes

Replace the firebrick if they become crumbly and/or if there is a 1/4 inch (6.35mm) gap between the bricks. Inspect the firebrick after each ash removal. The firebox is lined with high quality firebrick, which has exceptional insulating properties. There is no need to use a grate; simply build a fire on the firebox floor. Do not operate appliance without firebrick.

This Item Is Ineligible For Free Shipping