Install Instructions For Lopi Ceramic Snap-Disc (120 Degree): 250-00313-AMP
Instructional Notes
1.) Make sure your stove has cooled completely.
2.) Unplug the unit.
3.) Remove the necessary panels needed to gain access to the snap switch location.
4.) Disconnect the wires connecting to the switch.
5.) Loosen the mounting screws holding the switch in position and remove the old switch.
6.) Position the new switch and install the previously removed screws.
7.) Connect the previously removed leads to the new switch (Either wire can go to either side of the switch).
8.) Reinstall any previously removed access panels and plug in the unit.