Skip to main content
Skip to main content
Product title:

Vogelzang Pellet Stove (Agitator / Auger) Motor CCW (1RPM): 80488-AMP

Product rating:
Product price:
Save 10%
$149.99
$134.99

A $165.00 Savings over the OEM

Product SKU ! 707-GA (VOG)
Product MPN ! 80488
Product availability: In Stock
Bullet point features
Buy Now Pay Later

Description

Vogelzang Pellet Stove (Agitator/Drive) Motor CCW (1RPM): 80488.  This motor attaches to the auger or agitator (Depending on the model) and rotates in timed intervals.  If your motor is not turning and you have confirmed all safety switches are operating as they should, the motor may need to be replaced. 

* Double-check the manual for all specified models to verify Auger / Agitator part number!*


Replacement For Part Numbers:

  • 80488
  • 80457

UPC: 012685804880

Compatible Models

Technical Specs

Length (in) 4 ¾"
Width (in) 4 ¼"
Height (in) 2 ¾"
Voltage 120
Power type AC
Amperage 0.72
RPM (Rotations/Minute) 1
Rotation Direction Counter Clockwise
Frequency (Hz) 60
Wire Connectors Two Male Spades
Weight 3.5 lbs

Instructions

Install Instructions For Vogelzang Pellet Stove (Agitator / Auger) Motor CCW (1RPM): 80488-AMP

Instructional Documents:

Instructional Videos:

This is a basic overview of how to replace the auger/drive motor. This process will vary depending on the unit!

1.) Make sure that your unit is cool to the touch.

2.) Unplug the stove.

3.) Remove the needed panels to gain access to the auger/drive motor.

4.) After locating the motor, disconnect the wire leads connecting the motor to the wiring harness.

5.) Using a pair of pliers remove the retainer pin that attaches that auger motor to the auger shaft (This should release the auger motor). On some motors, a set screw will need to be removed.

6.) Position the new auger motor in place (You may need to rotate the auger in order to line up the hole on the auger shaft with the hole on the stub of the motor).

7.) Install the previously removed retainer pin or set screw.

8.) Reconnect the wire leads to the wiring harness.

9.) Reinstall any previously removed panels.

10.) Plug in the unit and test the motor.

Troubleshooting

Often when the drive/agitator motor is not turning, homeowners assume the motor has failed. While this can happen it is important to check the safety switches on your stove prior to replacing the motor. On many units, an issue with the pressure, hopper, or high-limit switch can cause the motor to stop turning.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Vogelzang Pellet Stove (Agitator/Drive) Motor CCW (1RPM): 80488.  This motor attaches to the auger or agitator (Depending on the model) and rotates in timed intervals.  If your motor is not turning and you have confirmed all safety switches are operating as they should, the motor may need to be replaced. 

* Double-check the manual for all specified models to verify Auger / Agitator part number!*


Replacement For Part Numbers:

  • 80488
  • 80457

UPC: 012685804880

Technical Specs

Length (in) 4 ¾"
Width (in) 4 ¼"
Height (in) 2 ¾"
Voltage 120
Power type AC
Amperage 0.72
RPM (Rotations/Minute) 1
Rotation Direction Counter Clockwise
Frequency (Hz) 60
Wire Connectors Two Male Spades
Weight 3.5 lbs

Instructions

Install Instructions For Vogelzang Pellet Stove (Agitator / Auger) Motor CCW (1RPM): 80488-AMP

Instructional Documents:

Instructional Videos:

This is a basic overview of how to replace the auger/drive motor. This process will vary depending on the unit!

1.) Make sure that your unit is cool to the touch.

2.) Unplug the stove.

3.) Remove the needed panels to gain access to the auger/drive motor.

4.) After locating the motor, disconnect the wire leads connecting the motor to the wiring harness.

5.) Using a pair of pliers remove the retainer pin that attaches that auger motor to the auger shaft (This should release the auger motor). On some motors, a set screw will need to be removed.

6.) Position the new auger motor in place (You may need to rotate the auger in order to line up the hole on the auger shaft with the hole on the stub of the motor).

7.) Install the previously removed retainer pin or set screw.

8.) Reconnect the wire leads to the wiring harness.

9.) Reinstall any previously removed panels.

10.) Plug in the unit and test the motor.

Troubleshooting

Often when the drive/agitator motor is not turning, homeowners assume the motor has failed. While this can happen it is important to check the safety switches on your stove prior to replacing the motor. On many units, an issue with the pressure, hopper, or high-limit switch can cause the motor to stop turning.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 46 reviews
93%
(43)
7%
(3)
0%
(0)
0%
(0)
0%
(0)
A
Albert S.

US Stove Auger Motor Made In USA By Gleason Avery (1-RPM CCW): 80488-AMP

J
Jocelyn J.
Replacement Auger Motor

My pellet stove suddenly stopped dropping pellets on a Saturday. Ordered the motor that day. Received it the next Tuesday (Monday was a Holiday) replaced it and stove back up and running. I am extremely pleased with the fast shipping and how well the new motor works.

G
Gary T.
Everything was great

It was packed and came to me in great shape

M
Maurice L.
Auger motor

Order was received promptly. Easily installed and is working perfectly.

W
Warrren S.
Return on pellet stove agitator drive motor

This company very good to work with had to get a new agitator drive motor I had got a few months ago it had quit working. Called about warranty it was covered had a new one sent out in a few hours I do recommend this company to any one 👍

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 46 reviews
93%
(43)
7%
(3)
0%
(0)
0%
(0)
0%
(0)
A
Albert S.

US Stove Auger Motor Made In USA By Gleason Avery (1-RPM CCW): 80488-AMP

J
Jocelyn J.
Replacement Auger Motor

My pellet stove suddenly stopped dropping pellets on a Saturday. Ordered the motor that day. Received it the next Tuesday (Monday was a Holiday) replaced it and stove back up and running. I am extremely pleased with the fast shipping and how well the new motor works.

G
Gary T.
Everything was great

It was packed and came to me in great shape

M
Maurice L.
Auger motor

Order was received promptly. Easily installed and is working perfectly.

W
Warrren S.
Return on pellet stove agitator drive motor

This company very good to work with had to get a new agitator drive motor I had got a few months ago it had quit working. Called about warranty it was covered had a new one sent out in a few hours I do recommend this company to any one 👍

123