Install Instructions For Vogelzang (Wood/Coal) Stove Cast Iron Leg: 40428
1. Uncrate and/or unpack the heater, removing all packing material, being careful not to dispose of the "Parts Bag".
2. Remove the following contents: A. (4) Legs with nut and bolt package B. (1) Lid with (1) Lid Lifter C. (1) Shaker Grate D. (1) Ash Door with (1) Slide Draft E. (1) Feed Door
3. Carefully lay the stove on its side, preferably on a soft surface. Note: A cardboard shipping carton placed flat works well for this application.
4. Securely attach all four (4) legs to the lower chamber using the nut and bolt package.
5. Carefully return the stove to the upright position and place it in the desired location.
6. Place the lid in position on the top plate.
7. Position the ash door with the slide draft on the front of the lower chamber.
8. Place the shaker grate in the lower chamber.
9. Place the heater on solid masonry or solid concrete. When the heater is used on a combustible floor, use an Underwriters' Listed floor protector. The floor protector must comply with UL Standards. The base should extend at least 18" beyond the door side of the heater and should extend under the flue pipe. After observing the clearances to combustibles, locate your floor protector accordingly and carefully place the stove in your selected location. Install stove pipe, elbows, and thimble as necessary, utilizing either a recently cleaned and inspected masonry chimney or a UL 103 HT Listed Residential Type and Building Heating Appliance Chimney.
