Englander Burn Pot for PDVC & PAF, Part# PU-BP02

$139.99
SKU PU-BP02
MPN PU-BP02

Frequently Bought Together

Description

This is a one-piece burn pot welded assembly. For 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10 and American Standard manufactured from 1998 to present. Also for 25-PAF, 55-SHP25 and 55-TRP25 manufactured from 2002 to present. See technical specs to see all the compatible stoves.

It requires a wear plate and a gasket, which are sold as separate parts.

Technical Specs

Tools Required ½" Socket Wrench

Video

Instructions

  1. Using a 1/2" socket wrench, loosen the two hex screws located under the ash lip, beneath the front door of the stove.
  2. With the screws turned out about 2", wiggle the burnpot free from the back wall of the stove
  3. Scrape the burnpot gasket from the wall of the stove
  4. Replace the burn pot gasket each time the burnpot has been removed.
  5. With you new gasket in place, push the burn pot back into position
  6. Tighten the hex screws back up against the burnpot until they connect with the surface and then turn each screw a full turn, alternating between left and right, until both screw are tight.


Helpful Tips

Generally, burn pots are considered a sacrificial item and should be replaced when it wears out. There are 3 parts to the PU-BP/ PU-BP02 burnpot assembly; the weldment, the wear plate and a gasket. Wear plates usually deteriorate first and can be replaced independently of the burnpot. If you are replacing the burnpot, ALWAYS get a new wear plate.


This burn pot should be replaced when the top edge of the pot, the portion of the metal that encompasses the feed tube, becomes warped or any part of the metal deteriorates.


If you have an igniter in your stove and are having problems with the stove igniting on its own, with the auto igniter, you may need a new gasket behind the burnpot OR you may require a new burnpot and gasket.



Warranty

Unfortunately sometimes products do not work like they are supposed to. We offer a 6 month warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.