Skip to main content
Product title:

Flame Energy SBI Igniter (300W): 44030

Product rating:
Product price:
Save 15%
Original Price $129.99
Current Price $110.49
Product SKU ! 44030-2
Product MPN ! 44030
Only 5 Left In Stock
Bullet point features

Pay over time with Affirm.

Description

Replacement igniter element for Flame pellet stoves. This is the older style ignitor with a threaded nut. 300W , 120V and measures 4.25" from nut to end. Diameter measures 3/8". Fits the following models:

Serial Specific Compatibility:

  • FP-35 (Serial # 100 - 440)
  • FP-35 Insert (Serial # 100 and above)
  • FP-45 (Serial # 100 - 529)

    UPC: 773389026625

    Replacement For Part Number:

    • 44030

    Compatible Models

    These are all of the confirmed compatible units for this product. This product may fit others, but these are the only ones we suggest ordering it for at this time.

    Flame Energy

    Technical Specs

    Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

    Length (in) 5"
    Width (in) ¾"
    Height (in) ¾"
    Outer Diameter (in) 0.38"
    Voltage 120
    Wattage 300
    Wire Connectors Two Female Spades
    Length From Nut to End 4-1/4"
    Special Features Threaded Nut
    Weight 2 oz

    Instructions

    Install Instructions For Flame Energy SBI Igniter (300W): 44030

    Instructional Documents

    Troubleshooting

    It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

    Troubleshooting Igniters

    Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

    For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

    If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

    Customers Also Bought

    Parts that customers who bought this one also ordered, the most popular first.

    • SKU
      MPN
      44038-AMP-4
      44038
      $89.99
      Flame Energy SBI Auger Motor 1RPM CW: 44038-AMP

      Flame Energy SBI Auger Motor 1RPM CW: 44038-AMP

      1RPM Clockwise 1 RPM CW
    • SKU
      MPN
      44041-AMP (FE)
      44041
      $19.99
      Flame Pellet Stove Hi Limit Heat Sensor: 44041-AMP

      Flame Pellet Stove Hi Limit Heat Sensor: 44041-AMP

      Open 250°/Normally°/Normally Closed Ceramic
    • SKU
      SE21045-3
      $1.49
      Flame Energy Burnpot Gasket: SE21045

      Flame Energy Burnpot Gasket: SE21045

    • SKU
      44038-AMP (FE)
      $179.99
      Flame Energy SBI Pellet Stove Auger Motor 1RPM CW: 44038-AMP

      Flame Energy SBI Pellet Stove Auger Motor 1RPM CW: 44038-AMP

      1RPM Clockwise 1.1 RPM CW
    • SKU
      44059-AMP (FE)
      $19.99
      Flame Energy Pellet Stove Thermodisc Snap Switch (250°F): 44059-AMP

      Flame Energy Pellet Stove Thermodisc Snap Switch (250°F): 44059-AMP

      Open 220°/250°/Normally Closed Ceramic
    • SKU
      AC07868(FE)
      $17.99
      Flame 1/2 Inch Black Spring Handle: AC07868

      Flame 1/2 Inch Black Spring Handle: AC07868

      Black Nickel
    • SKU
      AC06400 (FE)
      $29.99
      Flame Energy Glass Gasket With Adhesive (6' Length): AC06400

      Flame Energy Glass Gasket With Adhesive (6' Length): AC06400

      84" L x .625" W x .1" H Fiberglass
    • SKU
      SBI-CLEANOUT-GASKET(FE)
      $7.99
      Flame Combex Cleanout Panel Gasket

      Flame Combex Cleanout Panel Gasket

    • SKU
      SE44039-AMP (FE)
      $299.99
      Flame Energy Pellet Stove Combex Exhaust Blower (Combustion Blower): SE44039-AMP

      Flame Energy Pellet Stove Combex Exhaust Blower (Combustion Blower): SE44039-AMP

      120V 3000 RPM
    • SKU
      HDW600
      $2.99
      Combustion Blower Quick Disconnect Mounting Screw Hex Nuts (Set of 6): HDW600

      Combustion Blower Quick Disconnect Mounting Screw Hex Nuts (Set of 6): HDW600

    • SKU
      SE52545-AMP (FE)
      $44.99
      $49.99
      Flame FP-45 Pellet Stove Burn Pot: SE52545-AMP

      Flame FP-45 Pellet Stove Burn Pot: SE52545-AMP

      Steel
    • SKU
      44100-AMP
      $49.99
      SBI Tube Axial Blower 115V: 44100-AMP

      SBI Tube Axial Blower 115V: 44100-AMP

      115V / 18W 3100 RPM

    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for special parts may take up to 4 weeks for processing, and customers are responsible for return shipping charges.

    Shipping Information

    This Item Qualifies For Free Shipping!

    When Will My Order Ship?
    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
    Do You Offer Express Shipping?
    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
    How Does Free Shipping Work?
    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
    Do You Ship To Canada?
    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
    Do You Ship To Alaska Or Hawaii?
    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
    Do You Ship Outside The US Or Canada?
    Unfortunately, at this time we do not offer international shipping other than to Canada.
    Shipping Time Estimations
    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
    Learn More About Our Shipping Information

    Questions & Answers

    If your question does not concern this part, contact us directly or read our FAQs.

    No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.

    Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Deette W.
    Great parts and quick delivery!

    Quick shipping perfect part

    Still have a question?

    Call or email us and we will help you find the right part.

    Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQs

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Deette W.
    Great parts and quick delivery!

    Quick shipping perfect part