Skip to main content
Skip to main content
Product title:

Harman P38 Burnpot Weldment: 1-10-08514

Product rating:
Product price:
$329.99
Product SKU ! 1-10-08514
Product MPN ! 1-10-08514
Only 3 Left In Stock
Bullet point features

Frequently Bought Together

Description

Harman Pellet Stove Burn Pot Weldment (P38). This is the original manual light (non auto-ignition) burn pot for the P38 Series Pellet Stoves. This burn pot DOES NOT support the mounting of an igniter and should only be used on P38 pellet stoves. Fits both the two-knob and retrofitted three-knob controller.

Note: Gasket is NOT included!

Requires a gasket for mounting which is sold separately, part 1-00-07381


Replacement For Part Number:

  • 1-10-08514

View Compatible Models

UPC: 652174548699

Compatible Models

    Harman

  • P38
  • P38+

Technical Specs

Videos

Instructions

Install Instructions For Harman P38 Burnpot Weldment: 1-10-08514

1.) Unplug the stove and confirm that it is cool to the touch.

2.) Open the up and lower doors and remove the ash pan from the bottom of the stove.

3.) Spray the 4 nuts around the neck of the burn pot with penetrating oil and let it set.

4.) Remove the 4 nuts holding the burn pot to the rear of the stove (Take care not to lose the washers during this step).

5.) Remove the old gasket and install a replacement (It is recommended that a new gasket be used anytime the burn pot is replaced).

6.) Position the new burn pot in place, slide the four washers previously removed back into position and hand tighten each nut.

7.) Once all four nuts are snug by hand, begin to evenly tighten each with a wrench or socket (Tightening in a crisscross pattern works well and will help prevent overtightening on one particular corner of the burn pot).

8.) Set the ash pan back in the bottom of the stove and close both doors.

Troubleshooting

Before replacing the pot to correct burn issues, try each of the following:

  1. If you have excessive amounts of carbon building up around the base of the burn pot, tighten the four 1/2" nuts that secure the burn pot. If this doesn't solve the problem, replace the burn pot gasket
  2. Replace your door gasket and the ash pan gasket if you have separate doors
  3. Look at your door handle to make sure the latch mechanism on the stove is in working order allowing the door to fully close
  4. Make sure the hopper lid is making a tight seal
  5. Confirm that the burn pot clean-out cover is seated correctly.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Harman Pellet Stove Burn Pot Weldment (P38). This is the original manual light (non auto-ignition) burn pot for the P38 Series Pellet Stoves. This burn pot DOES NOT support the mounting of an igniter and should only be used on P38 pellet stoves. Fits both the two-knob and retrofitted three-knob controller.

Note: Gasket is NOT included!

Requires a gasket for mounting which is sold separately, part 1-00-07381


Replacement For Part Number:

  • 1-10-08514

View Compatible Models

UPC: 652174548699

Instructions

Assembly Instructions For Harman P38 Burnpot Weldment: 1-10-08514

1.) Unplug the stove and confirm that it is cool to the touch.

2.) Open the up and lower doors and remove the ash pan from the bottom of the stove.

3.) Spray the 4 nuts around the neck of the burn pot with penetrating oil and let it set.

4.) Remove the 4 nuts holding the burn pot to the rear of the stove (Take care not to lose the washers during this step).

5.) Remove the old gasket and install a replacement (It is recommended that a new gasket be used anytime the burn pot is replaced).

6.) Position the new burn pot in place, slide the four washers previously removed back into position and hand tighten each nut.

7.) Once all four nuts are snug by hand, begin to evenly tighten each with a wrench or socket (Tightening in a crisscross pattern works well and will help prevent overtightening on one particular corner of the burn pot).

8.) Set the ash pan back in the bottom of the stove and close both doors.

Troubleshooting

Before replacing the pot to correct burn issues, try each of the following:

  1. If you have excessive amounts of carbon building up around the base of the burn pot, tighten the four 1/2" nuts that secure the burn pot. If this doesn't solve the problem, replace the burn pot gasket
  2. Replace your door gasket and the ash pan gasket if you have separate doors
  3. Look at your door handle to make sure the latch mechanism on the stove is in working order allowing the door to fully close
  4. Make sure the hopper lid is making a tight seal
  5. Confirm that the burn pot clean-out cover is seated correctly.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Richard S.

Harman Pellet Stove Burnpot Weldment (P38): [****]

D
Doug m.
Perfect!

Worked out well fit perfectly!

R
Russell H.
thanks you!!!!

fast shipping!!! everything was in the box and right for my order. I love this place, every time i order i get the right stuff

K
Kent S.
Weldment Fits Perfectly

The weldment arrived promptly and installed very well. I'll be toasty this winter.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Richard S.

Harman Pellet Stove Burnpot Weldment (P38): [****]

D
Doug m.
Perfect!

Worked out well fit perfectly!

R
Russell H.
thanks you!!!!

fast shipping!!! everything was in the box and right for my order. I love this place, every time i order i get the right stuff

K
Kent S.
Weldment Fits Perfectly

The weldment arrived promptly and installed very well. I'll be toasty this winter.