Hearthstone Craftsbury I Ashpan Handle Assembly: 93-71915

Replacement Ashpan Handle Assembly For Hearthstone Craftsbury I (8391) 

KIT INCLUDES: 

• Wooden Handle (3900-177)
• Pan Head Screw 1/4-20x3/4” (4500-1359)
• Round Head Screw 1/4-20x3-1/4” (4500-1680)
• Flat Washer (4600-0300) 
  
• Lock Washers (4600-0400) 
  
• Spacer (4700-0850) 
  
• Disc Spring (5240-147) 
  
• Ash door handle lever (5391-021) 

NOTE:

For stoves with the serial number greater than 6999. If your stove serial number is lower, you need this handle instead.

Replacement For Part Number:

• 93-71915

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Hearthstone Craftsbury I Ashpan Handle Assembly: 93-71915

Instructional Documents

• Install Instructions PDF for Hearthstone 93-71915

Instructional Notes

1. Place the two lock washers onto the shaft of the 3-1/4” long screw. Push the screw through the wooden handle and thread it into the handle lever using the slotted screwdriver. If rust or other debris gets into the handle shaft, it may be necessary to chase the threads with a 1/4” x 20 tap before turning in the screw.

2. Open ash pan door for access to the phillips screw that holds the handle lever to the top edge of the ash door. Remove the screw with a phillips screwdriver and remove the damaged ash lever from the stove.

3. When placing the new ash lever on the stove, be careful to make sure that the actuating arm is under the spring loaded latch mechanism.

4. The components should be stacked in the following order: bolt, spring washer, flat washer, ash lever, and bushing. Carefully move the assembly so that the screw is lined up with the threaded hole and turn in the screw. Tighten it with the phillips screwdriver.

Troubleshooting Notes

Common causes of failure are a break at the weld, or the handle is used improperly causing the lever to bend. To properly open the ash door, simply pull the ash handle straight out. This will cause the inner spring latch to release allowing the door to drop open. Do not force the handle up or down. Forcing it in this manner can cause it to bend and come out of adjustment (or break).

This Item Qualifies For Free Shipping!