Lopi Burn Pot: 250-00128

This fire pot may only be used in Travis Pellet appliances with two latches on the door. The models and serial number restrictions are listed below (concerning the use of corn fuel supersedes reference in the owner's manual to burning wood pellet fuel only for the appliances listed below). You may also burn a mixture of corn and wood pellets up to a 50% - 50% proportion by volume.

Serial Specific Compatibility (Only Apply When Burning Corn):

• Yankee Pellet Stove                   Serial #2103-825001  -  2103- 832728
• Yankee Bay Fireplace Insert     Serial #2104-07021  -  2104-13191
• Leyden Pellet Stove                   Serial #2105-000001  -  2105-005598

Dimensions:

• Top Width: 8-1/8"
• Bottom Width: 7-1/4"
• Height: 3"
• Top Depth: 3"
• Bottom Depth: 2"

Replacement For Part Numbers:

• 250-00128
• 99300171

These are all of the confirmed compatible units for this product. This product may fit others, but these are the only ones we suggest ordering it for at this time.

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Lopi Burn Pot: 250-00128

Instructional Documents

• Install Instructions PDF for Lopi 250-00128

Instructional Notes

Install the fire pot by lowering it into the holder in the stove or insert. The large hole must face toward igniter tube at back of firebox. The assembly is made so it will only drop into place if the fire pot is turned to that position.

Troubleshooting Notes

Maintenance

• For an optimum fire and greatest efficiency, it is important to keep fire pot free of built up ashes. If you are burning only high quality wood pellets, you should check and clean the fire pot at least every two weeks or after ten bags of pellets.
• If the pellets you are burning have a high ash content or if you burn a corn/wood pellet mixture, we recommend that you check the fire pot every day and clean it if necessary. Hard ashes, called clinkers, may build up rapidly.
• Use a stiff brush and a steel tool such as a screw driver to clean the fire pot. Be sure all the holes are clear of debris.

Important Warnings

• Be sure the electrical power to the stove or insert is disabled prior to servicing the unit.
• Be sure the appliance has cooled thoroughly before removing or handling the fire pot.
• If combustion is slow, if the fire is slow to start or if clinkers build up rapidly in the fire pot, decrease the proportion of corn and increase the proportion of wood pellets, until you find a proportion that works well in your appliance.
• If your stove or insert is operated with a thermostat, you may notice the automatic igniter at times fails to light a 50/50 corn to pellet mix. If you experience this decrease the proportion of corn and increase the proportion of wood pellets in the mix.

This Item Qualifies For Free Shipping!