Install Instructions For PelPro Control Board: SRV7104-050
Instructional Documents
Instructional Notes
1.) Turn the dial control to the off position and unplug the stove.
2.) Remove the right side panel by loosening the screws that attach it to the back of the appliance.
3.) Disconnect the wires from the control board (The connectors are locking connectors. Pinch the release tab on each connector and gently tug/ rock loose).
4.) Pinch the 4 plastic pins from the rear of the unit with needle nose pliers to release the control board connectors.
5.) Install the new board following the steps in reverse.