Skip to main content
Skip to main content
Product title:

Regency GF55 and GFI55 Ignitor (300W ): 50-1067-AMP

Product rating:
Product price:
$39.99

A $230.00 Savings over the OEM

Product SKU ! 50-1067-AMP(REG)
Product MPN ! 50-1067
Product availability: In Stock
Bullet point features

Description

Replacement 300W Ignitor for Regency GF55 and GFI55 

Replaces part # 50-685 & GF55-004 


Replacement For Part Number:

  • 50-1067

View Compatible Models

Compatible Models

    Regency

  • GF55
  • GFI55

Technical Specs

Watts 300
Length 4"
Width 3/8"
Connectors Female Spades

Instructions

Troubleshooting

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement 300W Ignitor for Regency GF55 and GFI55 

Replaces part # 50-685 & GF55-004 


Replacement For Part Number:

  • 50-1067

View Compatible Models

Technical Specs

Watts 300
Length 4"
Width 3/8"
Connectors Female Spades

Instructions

Troubleshooting

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 63 reviews
97%
(61)
3%
(2)
0%
(0)
0%
(0)
0%
(0)
C
Christian B.
Perfect parts

Every part I’ve ordered from them has fit 100% of the time. It’s fantastic and their prices are good also! I’m so glad I’ve found them!

p
paul k.
GREAT PARTS STORE TO DO BUSINESS WITH

HAVING TO REPLACE SOME PARTS IN MY PELLET STOVE I HAVE USED STOVE PARTS FOR LESS 4 TIMES AND HAVE NO PROBLEM WITH THEIR PRODUCTS OR SERVICE AND DELIVERY GOOD PLACE TO DO BUSINESS WITH. A HAPPY CUSTOMER

C
Craig F.

Fast delivery,quality parts at a great price

L
Leslie h.
Igniter

Seems to be of good quality. The wires were longer which made it nicer to hook back up. Also it fixed my re-liting issue I was having. Would buy from again if needed. Fast shipping also.

D
Doug B.
"Up and Running"

The igniter quit and had to order another one...local pellet stove supply said nobody made them any more...just have to scrap it out...called Stove and Gr.....they had one and it was here in a week....my pellet stove is now happy along with the good wife. Good service and price for the igniter!

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 63 reviews
97%
(61)
3%
(2)
0%
(0)
0%
(0)
0%
(0)
C
Christian B.
Perfect parts

Every part I’ve ordered from them has fit 100% of the time. It’s fantastic and their prices are good also! I’m so glad I’ve found them!

p
paul k.
GREAT PARTS STORE TO DO BUSINESS WITH

HAVING TO REPLACE SOME PARTS IN MY PELLET STOVE I HAVE USED STOVE PARTS FOR LESS 4 TIMES AND HAVE NO PROBLEM WITH THEIR PRODUCTS OR SERVICE AND DELIVERY GOOD PLACE TO DO BUSINESS WITH. A HAPPY CUSTOMER

C
Craig F.

Fast delivery,quality parts at a great price

L
Leslie h.
Igniter

Seems to be of good quality. The wires were longer which made it nicer to hook back up. Also it fixed my re-liting issue I was having. Would buy from again if needed. Fast shipping also.

D
Doug B.
"Up and Running"

The igniter quit and had to order another one...local pellet stove supply said nobody made them any more...just have to scrap it out...called Stove and Gr.....they had one and it was here in a week....my pellet stove is now happy along with the good wife. Good service and price for the igniter!

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid