Skip to main content
Skip to main content
Product title:

Traeger Pellet Grill Hot Rod Igniter & Burn Pot Kit

Product rating:
Product price:
$49.99
Product SKU ! PG BP AND IGNITER KIT (TG)
Product availability: In Stock
Bullet point features

Description

Bring your Traeger pellet grill back to its peak performance with our burn pot and igniter repair kit.

Included In This Kit:

  • 1 x Burn pot (FAB310)
  • 1 x Igniter (BAC199)
  • 1 x 5 Amp Fuse (ELE211)
  • 4 x Stainless Steel Burn Pot Screws (HDW119)
  • 1 x M4 Igniter Screw (HDW477)
  • 1 x Hopper Burner Gasket (INS144)
  • 1 x Chimney Flue Pipe Gasket (INS145)

This kit uses aftermarket parts where applicable to help you save big!

    Note: This igniter is for pellet grills with AC components. If your grill requires a DC igniter and DOES NOT use a D2 controller, you require part KIT0223. If your model has a D2 controller, you will require part KIT0255.


    View Compatible Models

    UPC: 634868919787

    Compatible Models

      Traeger

    • Bronson 20
    • Century 22
    • Century 34
    • Century
    • Deluxe Elite 300
    • Double Commercial
    • Eastwood 22
    • Eastwood 34
    • Executive
    • Fremont
    • Heartland
    • Homestead 520
    • Junior (Gen 1)
    • Junior Elite 20
    • Large Commercial Trailer
    • Lil Tex Elite (Gen 2)
    • Lil Pig
    • Lil Tex Elite 22
    • Lonestar 20
    • Lonestar
    • Longhorn Steer
    • Mesa 20
    • Mesa 22
    • Pro 20
    • Pro Series 22
    • Pro Series 34
    • Professional
    • PTG Limited Edition
    • PTG
    • PTG+
    • Ranger
    • Renegade Elite 20
    • Renegade Pro
    • Ridgeland 572
    • Roll Top
    • Scout
    • Select Elite
    • Select Pro
    • Silverton
    • Tailgater 20
    • Texas Elite 34
    • Texas Elite
    • Texas Limited Edition
    • Texas
    • Texas Pro
    • Timberline 1300 AC
    • Timberline 850 AC
    • Timberline XL (2022+)
    • Trailhead
    • XL

    Technical Specs

    Watts 200
    Voltage 120v
    Diameter 3/8"
    Wire Length 30"
    Length 3 1/2"
    Connector Molex

    Instructions

    Install Instructions For Traeger Pellet Grill Hot Rod Igniter & Burn Pot Kit

    The igniter is located and the end of the pellet burner assembly and is fastened into the burnpot/ fire pot using a set screw. Depending upon your specific model, the process to access this part and replace it may vary slightly from model to model.

    1. Unplug the grill from power
    2. Empty any pellets you may have in the hopper
    3. Remove the access panel on the bottom of the hopper if your model has one.
    4. Remove the side screws from the hopper shell and separate the hopper from the burner assembly. You do not need to unplug every wire connection.
    5. Most, if not all models will have the igniter plugged into a purple wire on the controller's main harness. The igniter wire will be the ONLY braided wires connected to the controller (not a plastic coating). Remove the braided wire connection at the molex disconnect.
    6. Remove all of the cooking grids, drip pan and baffle from the grill.
    7. Remove the 4 burnpot screws and then wiggle the burnpot free from the burner.
    8. Remove the rubber grommet from the burner assembly where the igniter wires enter into the burner from the hopper side and feed the wires into the burner until the molex connection is in the burner. Remove the burnpot. The igniter wires will pull out through the burner. Now you can loosen the igniter set screw and replace the igniter.
    9. When installing the new igniter, 3/8" to 1/2" of the igniter tip should be visible in the burnpot. Now tighten the set screw.
    10. Set the burnpot into the grill and feed the igniter wires into the burner until the molex is seen at the passthrough hole and then pull it through. Slip on the ribber grommet and plug the new igniter into the harness.
    11. Pull the slack from the wires as you fit the burnpot into the burner assembly.
    12. Replace the four burnpot screws.
    13. Take up the slack of the burnpot wires and zip tie if needed.
    14. Fit the grommet into the wire hole.
    15. Reposition the hopper back on the burner and secure with the mounting screws
    16. Replace the hopper bottom access panel if you have one.
    17. Plug in you grill and enjoy.
    Hot to Replace the Hot Rod / Ignitor

    Troubleshooting

    If the ignitor/hot rod to your pellet grill has burned out, you can still use your grill to cook on. Click on this page for instructions: Manual Lighting Procedures


    Troubleshooting Igniters:

    Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

    For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

    If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    HOLIDAY UPDATE
    Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

    • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
    • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
    CANADA UPDATE

    Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    Bring your Traeger pellet grill back to its peak performance with our burn pot and igniter repair kit.

    Included In This Kit:

    • 1 x Burn pot (FAB310)
    • 1 x Igniter (BAC199)
    • 1 x 5 Amp Fuse (ELE211)
    • 4 x Stainless Steel Burn Pot Screws (HDW119)
    • 1 x M4 Igniter Screw (HDW477)
    • 1 x Hopper Burner Gasket (INS144)
    • 1 x Chimney Flue Pipe Gasket (INS145)

    This kit uses aftermarket parts where applicable to help you save big!

      Note: This igniter is for pellet grills with AC components. If your grill requires a DC igniter and DOES NOT use a D2 controller, you require part KIT0223. If your model has a D2 controller, you will require part KIT0255.


      View Compatible Models

      UPC: 634868919787

      Compatible Models

        Traeger

      • Bronson 20
      • Century 22
      • Century 34
      • Century
      • Deluxe Elite 300
      • Double Commercial
      • Eastwood 22
      • Eastwood 34
      • Executive
      • Fremont
      • Heartland
      • Homestead 520
      • Junior (Gen 1)
      • Junior Elite 20
      • Large Commercial Trailer
      • Lil Tex Elite (Gen 2)
      • Lil Pig
      • Lil Tex Elite 22
      • Lonestar 20
      • Lonestar
      • Longhorn Steer
      • Mesa 20
      • Mesa 22
      • Pro 20
      • Pro Series 22
      • Pro Series 34
      • Professional
      • PTG Limited Edition
      • PTG
      • PTG+
      • Ranger
      • Renegade Elite 20
      • Renegade Pro
      • Ridgeland 572
      • Roll Top
      • Scout
      • Select Elite
      • Select Pro
      • Silverton
      • Tailgater 20
      • Texas Elite 34
      • Texas Elite
      • Texas Limited Edition
      • Texas
      • Texas Pro
      • Timberline 1300 AC
      • Timberline 850 AC
      • Timberline XL (2022+)
      • Trailhead
      • XL

      Technical Specs

      Watts 200
      Voltage 120v
      Diameter 3/8"
      Wire Length 30"
      Length 3 1/2"
      Connector Molex

      Instructions

      Install Instructions For Traeger Pellet Grill Hot Rod Igniter & Burn Pot Kit

      The igniter is located and the end of the pellet burner assembly and is fastened into the burnpot/ fire pot using a set screw. Depending upon your specific model, the process to access this part and replace it may vary slightly from model to model.

      1. Unplug the grill from power
      2. Empty any pellets you may have in the hopper
      3. Remove the access panel on the bottom of the hopper if your model has one.
      4. Remove the side screws from the hopper shell and separate the hopper from the burner assembly. You do not need to unplug every wire connection.
      5. Most, if not all models will have the igniter plugged into a purple wire on the controller's main harness. The igniter wire will be the ONLY braided wires connected to the controller (not a plastic coating). Remove the braided wire connection at the molex disconnect.
      6. Remove all of the cooking grids, drip pan and baffle from the grill.
      7. Remove the 4 burnpot screws and then wiggle the burnpot free from the burner.
      8. Remove the rubber grommet from the burner assembly where the igniter wires enter into the burner from the hopper side and feed the wires into the burner until the molex connection is in the burner. Remove the burnpot. The igniter wires will pull out through the burner. Now you can loosen the igniter set screw and replace the igniter.
      9. When installing the new igniter, 3/8" to 1/2" of the igniter tip should be visible in the burnpot. Now tighten the set screw.
      10. Set the burnpot into the grill and feed the igniter wires into the burner until the molex is seen at the passthrough hole and then pull it through. Slip on the ribber grommet and plug the new igniter into the harness.
      11. Pull the slack from the wires as you fit the burnpot into the burner assembly.
      12. Replace the four burnpot screws.
      13. Take up the slack of the burnpot wires and zip tie if needed.
      14. Fit the grommet into the wire hole.
      15. Reposition the hopper back on the burner and secure with the mounting screws
      16. Replace the hopper bottom access panel if you have one.
      17. Plug in you grill and enjoy.
      Hot to Replace the Hot Rod / Ignitor

      Troubleshooting

      If the ignitor/hot rod to your pellet grill has burned out, you can still use your grill to cook on. Click on this page for instructions: Manual Lighting Procedures


      Troubleshooting Igniters:

      Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

      For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

      If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

      Warranty

      Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

      Shipping Info

      HOLIDAY UPDATE
      Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

      • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
      • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
      CANADA UPDATE

      Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

      When Will My Order Ship?

      All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

      Do You Offer Express Shipping?

      Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

      How Does Free Shipping Work?

      Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

      Do You Ship To Canada?

      We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

      Do You Ship To Alaska Or Hawaii?

      We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

      Do You Ship Outside The US Or Canada?

      Unfortunately, at this time we do not offer international shipping other than to Canada.

      Shipping Time Estimations

      For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

      Learn More About Our Shipping Information

      Customer Reviews

      Based on 3 reviews
      100%
      (3)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      J
      Jordan H.
      Traeger renegade pro parts

      Everything was seamless and fit properly. Very good quality parts. I chose 2 day shipping and parts showed up exactly on time and saved the day for thanksgiving. Highly recommended AAA+++

      M
      Mark A.
      Grill parts

      Right parts. Fit perfect. Fast service.

      B
      Bryan M.
      awesome service

      A very heartfelt THANKS to Daniel! He guided me to the correct parts for my Traeger smoker, it is now operating like new.
      Parts were boxed very well and arrived sooner than expected.

      QUESTIONS & ANSWERS

      If your question does not concern this specific product, use our contact form

      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Customer Reviews

      Based on 3 reviews
      100%
      (3)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      J
      Jordan H.
      Traeger renegade pro parts

      Everything was seamless and fit properly. Very good quality parts. I chose 2 day shipping and parts showed up exactly on time and saved the day for thanksgiving. Highly recommended AAA+++

      M
      Mark A.
      Grill parts

      Right parts. Fit perfect. Fast service.

      B
      Bryan M.
      awesome service

      A very heartfelt THANKS to Daniel! He guided me to the correct parts for my Traeger smoker, it is now operating like new.
      Parts were boxed very well and arrived sooner than expected.

      Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid