Install Instructions For US Stove American Harvest 6039 Pellet Stove Circuit Board: 80507-AMP
1.) After confirming the stove is completely cool, unplug the unit.
2.) Remove the necessary screws to allow for removal of the needed access panel(s).
3.) Remove the needed access panels (Pay attention to where the connectors from the wiring harness are plugged into the back of the control panel).
4.) Unplug all the wires that are plugged into the back of the circuit board.
5.) Using a screwdriver, remove the two screws that secure the board to the side panel.
6.) Remove the old board and set it aside.
7.) Position the new control board in place and reinstall the two screws that secure it to the side panel.
8.) Plug in all the wires and connectors to the back of the board using the wiring diagram located in your owner's manual as a guide.
9.) Reposition any previously removed panels and reattach them.
10.) Plug in the unit and press the on button to check for proper operation.