US Stove (Wood/Coal) Furnace Cast Iron Shaker Grate Frame: 40256

USSC (Wood/Coal) Furnace Cast Iron Shaker Grate Frame (Does not include the shaker grate). The frame holds the shaker grate in the correct position, allowing it to pivot from side to side. You should regularly inspect the frame and grate when cleaning the unit. If you notice that the frame is warped or starting to burn out, it should be replaced!  

*Sold Individually*

UPC: 012685402567

Replacement For Part Number:

• 40256

These are all of the confirmed compatible units for this product. This product may fit others, but these are the only ones we suggest ordering it for at this time.

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For US Stove (Wood/Coal) Furnace Cast Iron Shaker Grate Frame: 40256

Instructional Documents

• Install Instructions PDF for US Stove 40256

Instructional Notes

1.) Open the main load door.

2.) Remove the smoke curtain/shield. This will require you to loosen the two bolts above the main load door. (Doing this will give you easier access to the interior of the furnace).

3.) Remove the front and back liner (This will likely require you to remove some of the interior firebricks. Pay attention to the position of the firebrick).

4.) Next, open the ash pan door.

5.) Pull the shaker frame and shaker grate forward and out of the unit (You may have more than one frame and grate).

6.) Place the shaker frame on a flat surface and remove the shaker grate from the frame by sliding it out of the grooves (If the grate or frame is warped, it may be helpful to gently tap the grate with a hammer to dislodge it from the frame).

7.) Now grab your new shaker grate or frame and place the pieces together (Fit them together the same way the original pieces were previously installed).

8.) Slide the grate or grates back into position (It is important to make sure the grates are positioned correctly. Make sure that the long, narrow end of the grate is facing you and that the first grate is pushed all the way to the back of the unit. The grate will not work properly if it is installed backward). If you have two grates, they should meet and connect in the middle.

9.) Before closing your ash pan door, attach your shaker handle and make sure that the grates can move freely. Shut the ash pan door.

10.) Reinstall any previously removed liners and firebrick.

11.) Reattach the smoke curtain/shield if previously removed and tighten the bolts.

*Instructions may vary from unit to unit*

Troubleshooting Notes

-The shaker frame holds the shaker grate in place. If you are having a difficult time moving the shaker grate check to make sure the shaker frame is not warped or broken. If you see that the shaker grate has holes, cracks forming or it is warped, the frame should be replaced!

This Item Qualifies For Free Shipping!