Vogelzang Wood/Coal Furnace Cast IronShaker Grate Frame (Does not include the shaker grate). The shaker grate frame is an important part of your furnace. The frame holds the shaker grate in the correct position allowing it to pivot from side to side. You should regularly inspect the frame and grate when cleaning the unit. If you notice that the frame is warped or starting to burn out it should be replaced!
Install Instructions For Vogelzang Cast Iron Shaker Grate Frame: 40256-AMP
Shaker Frame / Grate Replacement:
1.) Open the main load door.
2.) Remove the smoke curtain/shield. This will require you to loosen the two bolts above the main load door. (Doing this will give you easier access to the interior of the furnace).
3.) Remove the front and back liner (This will likely require you to remove some of the interior firebricks. Pay attention to the position of the firebrick).
4.) Next, open the ash pan door.
5.) Pull the shaker frame and shaker grate forward and out of the unit (You may have more than one frame and grate).
6.) Place the shaker frame on a flat surface and remove the shaker grate from the frame by sliding it out of the groves (If the grate or frame is warped it may be helpful to gently tap the grate with a hammer to dislodge it from the frame).
7.) Now grab your new shaker grate or frame and place the pieces together (Fit them together the same way the original pieces were previously installed).
8.) Slide the grate or grates back into position (It is important to make sure the grates are positioned correctly. Make sure that the long, narrow end of the grate is facing you and that the first grate is pushed all the way to the back of the unit. The grate will not work properly if it is installed backward). If you have two grates they should meet and connect in the middle.
9.) Before closing your ash pan door attach your shaker handle and make sure that the grates are able to move freely. Shut the ash pan door.
10.) Reinstall any previously removed liners and firebrick.
11.) Reattach the smoke curtain/shield if previously removed and tighten the bolts.
Troubleshooting
-The shaker frame holds the shaker grate in place. If you are having adifficult time moving the shaker grate check to make sure the shaker frame is not warped or broken. If you see that the shaker grate has holes, cracks forming or it is warped, the frame should be replaced!
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Information
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Vogelzang Wood/Coal Furnace Cast IronShaker Grate Frame (Does not include the shaker grate). The shaker grate frame is an important part of your furnace. The frame holds the shaker grate in the correct position allowing it to pivot from side to side. You should regularly inspect the frame and grate when cleaning the unit. If you notice that the frame is warped or starting to burn out it should be replaced!
Install Instructions For Vogelzang Cast Iron Shaker Grate Frame: 40256-AMP
Shaker Frame / Grate Replacement:
1.) Open the main load door.
2.) Remove the smoke curtain/shield. This will require you to loosen the two bolts above the main load door. (Doing this will give you easier access to the interior of the furnace).
3.) Remove the front and back liner (This will likely require you to remove some of the interior firebricks. Pay attention to the position of the firebrick).
4.) Next, open the ash pan door.
5.) Pull the shaker frame and shaker grate forward and out of the unit (You may have more than one frame and grate).
6.) Place the shaker frame on a flat surface and remove the shaker grate from the frame by sliding it out of the groves (If the grate or frame is warped it may be helpful to gently tap the grate with a hammer to dislodge it from the frame).
7.) Now grab your new shaker grate or frame and place the pieces together (Fit them together the same way the original pieces were previously installed).
8.) Slide the grate or grates back into position (It is important to make sure the grates are positioned correctly. Make sure that the long, narrow end of the grate is facing you and that the first grate is pushed all the way to the back of the unit. The grate will not work properly if it is installed backward). If you have two grates they should meet and connect in the middle.
9.) Before closing your ash pan door attach your shaker handle and make sure that the grates are able to move freely. Shut the ash pan door.
10.) Reinstall any previously removed liners and firebrick.
11.) Reattach the smoke curtain/shield if previously removed and tighten the bolts.
Troubleshooting
-The shaker frame holds the shaker grate in place. If you are having adifficult time moving the shaker grate check to make sure the shaker frame is not warped or broken. If you see that the shaker grate has holes, cracks forming or it is warped, the frame should be replaced!
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Info
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
I put new shaker grates, grate frame, cast back liner, fire brick, and made a new baffle out of 1/4 inch channel iron. Wood furnace seems to perform like when I first bought it. Very satisfied with quality of parts purchased.
P
Pam M.
Shaker grate
Love the parts and the quick service
B
Betty E.
US Stove Company Cast Iron Shaker Grate Frame, 40256-AMP
I put new shaker grates, grate frame, cast back liner, fire brick, and made a new baffle out of 1/4 inch channel iron. Wood furnace seems to perform like when I first bought it. Very satisfied with quality of parts purchased.
P
Pam M.
Shaker grate
Love the parts and the quick service
B
Betty E.
US Stove Company Cast Iron Shaker Grate Frame, 40256-AMP
