Skip to main content
Skip to main content
Product title:

Whitfield Convection Blower: 12146109

Product rating:
Product price:
$299.99
Product SKU ! 12146109
Product MPN ! 12146109
Bullet point features

Frequently Bought Together

Total Price: $319.98

Description

Whitfield Pellet Stove Room Fan/ Convection Blower.

Fits the following stoves:

All Advantage stoves, Profile 20/30, Optima 2/3, Quest Plus, T300P/T301P/T305P/T308P, and select Prodigy stoves such as:

  • Prodigy I - WP3 Serial number 1001 - 2281
  • Prodigy II - WP3 Serial number 1001 - 2281

    •  

    Note: Will not fit regular Quest stoves, only Quest Plus. If you aren't sure which model you have, check under the hopper lid or behind the stove.



    Replacement For Part Numbers:

    • 12146109
    • 12126109
    • 7021-7786
    • 70217786
    • 702111470
    • 7021-11470

    View Compatible Models

    Compatible Models

      Whitfield

    • Advantage II INS
    • Advantage II
    • Advantage II-T C
    • Advantage II-T
    • Advantage III
    • Advantage Plus FS
    • Optima 2 FS
    • Optima 3 FS
    • Optima 3 INS
    • Prodigy 1 (1001 - 2281)
    • Prodigy 2 (1001 - 2281)
    • Profile 20 FS (7495 - 7494)
    • Profile 30 FS (11905 - 11904)
    • Profile 30 INS (11905 - 11904)
    • Quest Plus FS WP4
    • Quest Plus INS WP4
    • Traditions T300P
    • Traditions TP300

    Technical Specs

    Volts 115
    Cycles 60Hz
    Amps .5
    RPM 3000

    Instructions

    Install Instructions For Whitfield Convection Blower: 12146109

    The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.

    • Locate the motor and find the four screws or nuts that secure the motor
    • Remove the screws or nuts
    • Unplug the blower from the wiring harness
    • Install new Blower to mounting post and tighten screws or nuts
    • Reconnect power

    Troubleshooting

    If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


    Current versions of this blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in that are made to the original spec requiring lubrication. This will be indicated on the listing table attached to the blower.


    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    This Item Qualifies For Free Shipping!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    Whitfield Pellet Stove Room Fan/ Convection Blower.

    Fits the following stoves:

    All Advantage stoves, Profile 20/30, Optima 2/3, Quest Plus, T300P/T301P/T305P/T308P, and select Prodigy stoves such as:

  • Prodigy I - WP3 Serial number 1001 - 2281
  • Prodigy II - WP3 Serial number 1001 - 2281

    •  

    Note: Will not fit regular Quest stoves, only Quest Plus. If you aren't sure which model you have, check under the hopper lid or behind the stove.



    Replacement For Part Numbers:

    • 12146109
    • 12126109
    • 7021-7786
    • 70217786
    • 702111470
    • 7021-11470

    View Compatible Models

    Compatible Models

      Whitfield

    • Advantage II INS
    • Advantage II
    • Advantage II-T C
    • Advantage II-T
    • Advantage III
    • Advantage Plus FS
    • Optima 2 FS
    • Optima 3 FS
    • Optima 3 INS
    • Prodigy 1 (1001 - 2281)
    • Prodigy 2 (1001 - 2281)
    • Profile 20 FS (7495 - 7494)
    • Profile 30 FS (11905 - 11904)
    • Profile 30 INS (11905 - 11904)
    • Quest Plus FS WP4
    • Quest Plus INS WP4
    • Traditions T300P
    • Traditions TP300

    Technical Specs

    Volts 115
    Cycles 60Hz
    Amps .5
    RPM 3000

    Instructions

    Install Instructions For Whitfield Convection Blower: 12146109

    The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.

    • Locate the motor and find the four screws or nuts that secure the motor
    • Remove the screws or nuts
    • Unplug the blower from the wiring harness
    • Install new Blower to mounting post and tighten screws or nuts
    • Reconnect power

    Troubleshooting

    If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


    Current versions of this blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in that are made to the original spec requiring lubrication. This will be indicated on the listing table attached to the blower.


    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Info

    This Item Qualifies For Free Shipping!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    Tony B.
    Whitfield Convection Blower

    Great part. Works great. I like to go with OEM parts whenever I can. Have had bad luck with aftermarket on my stove. Stove and Grill Parts For Less is my choice for my pellet stove parts!

    D
    Duane S.
    Great parts supplier

    great product line. Got my order right away. would use them again

    V
    Vicki M.

    Lennox Convection Blower for the Bella, #H7619

    J
    John S.
    Nice blower, fast shipping

    Haven't installed it yet, but don't expect any problems.

    A
    Anonymous
    Room Air Blower Replacement

    Excellent! The blower was easily installed and now we're toasty warm. Thanks for the quick service

    QUESTIONS & ANSWERS

    If your question does not concern this specific product, use our contact form
    Ask a Question

    • can just the fan be purchased anywhere the fan melted but the motor still works fine

      Hello,
      If you are looking to replace the impeller for part number 12146109 you can replace the plastic one with this metal version: Replacement Impeller.

    • My Whitfield Advantage II blower part number on the blower label is 12126109. Does the second "2" instead of the "4" make any difference ? The volts, cycles, and RPM are the same, but the Amps are listed as 1.5 not .5 Thanks for your help.

      The 12126109 is the same as the 12146109.

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    Tony B.
    Whitfield Convection Blower

    Great part. Works great. I like to go with OEM parts whenever I can. Have had bad luck with aftermarket on my stove. Stove and Grill Parts For Less is my choice for my pellet stove parts!

    D
    Duane S.
    Great parts supplier

    great product line. Got my order right away. would use them again

    V
    Vicki M.

    Lennox Convection Blower for the Bella, #H7619

    J
    John S.
    Nice blower, fast shipping

    Haven't installed it yet, but don't expect any problems.

    A
    Anonymous
    Room Air Blower Replacement

    Excellent! The blower was easily installed and now we're toasty warm. Thanks for the quick service

    Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid