Assembly Instructions For
Ashley Ceramic Fiber Board & Blanket Kit: 88158-AMP
1.) Make sure the fire is completely out and your stove is cool to the touch.
2.) Open the main load door.
3.) Locate the retainer clip and bolt on the first reburn tube.
4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board and blanket (On some units, you may be able to carefully remove these items without removing any of the tubes).
5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).
6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle and blanket).
7.) Slide the old baffle and blanket out.
8.) Position the new baffle and blanket in place (Make sure the new baffle and blanket are positioned correctly. If they are too far forward it may cause issues with the burn).
9.) Reinstall any previously removed tubes and retain clips.
10.) Close the door.