Ashley (Multi-Fuel) 4 RPM CW (Clockwise) Agitator Motor. This motor attaches to the agitator and rotates the shaft in timed intervals. This helps break up any hard deposits that are starting to form in the burn pot.
*Double check your part number to verify Auger or Agitator Motor Replacement.*
Install Instructions For Ashley (Multi-Fuel) 4-RPM CW Agitator/Drive Motor: 80456-AMP
1.) Make sure that your unit is completely cool to the touch.
2.) Unplug the stove from the wall outlet.
3.) Using a wrench or socket remove the screws/bolts attaching the side panel to the stove.
4.) While supporting the panel, disconnect the wires from the control board (Pay special attention to the location of these connections).
5.) Carefully set the side panel away from the unit.
6.) Using a wrench loosen and remove the 4 screws/bolts holding the agitator motor in place.
7.) With an Allen wrench, loosen the two screws holding the gear to the agitator motor.
8.) Remove the gear from the agitator motor.
9.) Slide the agitator motor out towards the back of the unit.
10.) Remove the wire leads connected to the agitator motor.
11.) Install the previously removed leads onto the new motor.
12.) Slide the new motor into position.
13.) Hand thread the 4 previously removed bolts back in place (Keep these screws/bolts loose until the gear and chain have been reattached).
14.) Set the gear and chain into position on the new motor and tighten both set screws firmly.
15.) Adjust the motor so that there is slight tension on the chain and then tighten all for bolts/screws.
16.) Reposition the side panel next to the stove and reconnect the previously removed wires to the control panel (Make sure all wires are reconnected to the proper terminals).
17.) Slide the panel back into position and install the previously removed bolts/screws.
18.) Plug in your unit and test the motor.
Troubleshooting
If clinkers start to develop in the firepot it should be cleaned thoroughly. You may have to do this once or twice a day depending on the moisture content of the fuel you are bunning.
If this is not cleaned out, it could cause the agitator to jam.
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Information
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Ashley (Multi-Fuel) 4 RPM CW (Clockwise) Agitator Motor. This motor attaches to the agitator and rotates the shaft in timed intervals. This helps break up any hard deposits that are starting to form in the burn pot.
*Double check your part number to verify Auger or Agitator Motor Replacement.*
Install Instructions For Ashley (Multi-Fuel) 4-RPM CW Agitator/Drive Motor: 80456-AMP
1.) Make sure that your unit is completely cool to the touch.
2.) Unplug the stove from the wall outlet.
3.) Using a wrench or socket remove the screws/bolts attaching the side panel to the stove.
4.) While supporting the panel, disconnect the wires from the control board (Pay special attention to the location of these connections).
5.) Carefully set the side panel away from the unit.
6.) Using a wrench loosen and remove the 4 screws/bolts holding the agitator motor in place.
7.) With an Allen wrench, loosen the two screws holding the gear to the agitator motor.
8.) Remove the gear from the agitator motor.
9.) Slide the agitator motor out towards the back of the unit.
10.) Remove the wire leads connected to the agitator motor.
11.) Install the previously removed leads onto the new motor.
12.) Slide the new motor into position.
13.) Hand thread the 4 previously removed bolts back in place (Keep these screws/bolts loose until the gear and chain have been reattached).
14.) Set the gear and chain into position on the new motor and tighten both set screws firmly.
15.) Adjust the motor so that there is slight tension on the chain and then tighten all for bolts/screws.
16.) Reposition the side panel next to the stove and reconnect the previously removed wires to the control panel (Make sure all wires are reconnected to the proper terminals).
17.) Slide the panel back into position and install the previously removed bolts/screws.
18.) Plug in your unit and test the motor.
Troubleshooting
If clinkers start to develop in the firepot it should be cleaned thoroughly. You may have to do this once or twice a day depending on the moisture content of the fuel you are bunning.
If this is not cleaned out, it could cause the agitator to jam.
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Info
This Item Qualifies For Free Shipping!
HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.
USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE
Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
