Skip to main content
Skip to main content
Product title:

Ashley Pellet Stove Low Temp (140F) Therm-O-Disc: 80599

Product rating:
Product price:
Save 10%
$49.99
$44.99
Product SKU ! 80599 (ASH)
Product MPN ! 80599
Product availability: In Stock
Bullet point features
Buy Now Pay Later

Have a Question? Contact Us 24/7 to Ask a Specialist

  • FREE Shipping

    Orders over $99

  • 30-Day Returns

    Hassle free return policy

  • 90-Day Warranty

    Included with purchase

  • Same-Day Shipping

    On most items*

Description

Ashley Pellet Stove Low Temperature Therm-O-Disc (140F): 80599. This switch detects the increase in exhaust temperature, verifying that the fire has started. This allows the unit to shift from start-up to a maintenance burn. If your unit lights initially but goes out after the fire is established, this switch may need to be replaced.  

 


Replacement For Part Number:

  • 80599

UPC: 012685000794

Compatible Models

Technical Specs

Length (in) 2"
Width (in) 1 ¾"
Height (in) 1"
Open Temp (F) 140
Close Temp (F) 130
Material Ceramic
Mounting Type Air Stream (Hole)
Switch Size Large
Mounting Holes Distance 0.9375"
Weight 1.25 oz

Instructions

Install Instructions For Ashley Pellet Stove Low Temp (140F) Therm-O-Disc: 80599

Instructional Documents:

Instructional Videos:

1.) Make sure your unit has completely cooled.

2.) Disconnect the power from your stove.

3.) Remove the needed panels to gain access to the Therm-O-Disc (Normally, the low limit switch is mounted on the combustion blower housing).

4.) Disconnect the wires from the switch.

5.) Remove the two screws securing the thermal disk to the exhaust blower housing and remove the old switch (Remove the old gasket as well if it needs to be replaced).

6.) Hold the gasket in place and set the new thermal disk in the opening.

7.) Install the previously removed screws to secure the switch in place.

8.) Reconnect the wires on either side of the thermal disk.

9.) Replace any previously removed panels.

10.) Reconnect power to the unit and run a test burn to confirm the stove is operational.

Troubleshooting

This is a L140-10 made from a ceramic material which is high-heat tolerant. Because it's normally closed, it's most often referred to as a limit switch. At ambient room temperature this switch is normally closed or ON and is ready to power a circuit. The switch will open at 140 degrees to cut power and will return to it's normal state at 130 degrees to restore power automatically. Failure of this switch happens when it stops opening or closing at the designated temperature thresholds.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Ashley Pellet Stove Low Temperature Therm-O-Disc (140F): 80599. This switch detects the increase in exhaust temperature, verifying that the fire has started. This allows the unit to shift from start-up to a maintenance burn. If your unit lights initially but goes out after the fire is established, this switch may need to be replaced.  

 


Replacement For Part Number:

  • 80599

UPC: 012685000794

Technical Specs

Length (in) 2"
Width (in) 1 ¾"
Height (in) 1"
Open Temp (F) 140
Close Temp (F) 130
Material Ceramic
Mounting Type Air Stream (Hole)
Switch Size Large
Mounting Holes Distance 0.9375"
Weight 1.25 oz

Instructions

Install Instructions For Ashley Pellet Stove Low Temp (140F) Therm-O-Disc: 80599

Instructional Documents:

Instructional Videos:

1.) Make sure your unit has completely cooled.

2.) Disconnect the power from your stove.

3.) Remove the needed panels to gain access to the Therm-O-Disc (Normally, the low limit switch is mounted on the combustion blower housing).

4.) Disconnect the wires from the switch.

5.) Remove the two screws securing the thermal disk to the exhaust blower housing and remove the old switch (Remove the old gasket as well if it needs to be replaced).

6.) Hold the gasket in place and set the new thermal disk in the opening.

7.) Install the previously removed screws to secure the switch in place.

8.) Reconnect the wires on either side of the thermal disk.

9.) Replace any previously removed panels.

10.) Reconnect power to the unit and run a test burn to confirm the stove is operational.

Troubleshooting

This is a L140-10 made from a ceramic material which is high-heat tolerant. Because it's normally closed, it's most often referred to as a limit switch. At ambient room temperature this switch is normally closed or ON and is ready to power a circuit. The switch will open at 140 degrees to cut power and will return to it's normal state at 130 degrees to restore power automatically. Failure of this switch happens when it stops opening or closing at the designated temperature thresholds.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Landis
Fixed issue with stove turning off shortly after startup

Our Ashley pellet stove would turn off 10 to 15 minutes after starting up and blink e3, error code 3. This thermostat fix the problem and the pellet stove has started up and run normally about six times since then. Delivery was faster than expected.

M
MjW
Positive review for product

The website was very easy to maneuver and ordering was simple. The only problem I had was the time it took to get to me. I don't feel that was this company's fault, however. They shipped it in a timely manner but it happened to be during the holiday period. Would definitely use them again

A
AMANDA S.

Ashley Low Temp 140F Thermodisc Switch For Many Models, 80599

J
Johannes V.Z.
Worked as expected.

Worked as expected, fast delivery and awesome support.

A
Alex A.

Perfect transaction!

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Landis
Fixed issue with stove turning off shortly after startup

Our Ashley pellet stove would turn off 10 to 15 minutes after starting up and blink e3, error code 3. This thermostat fix the problem and the pellet stove has started up and run normally about six times since then. Delivery was faster than expected.

M
MjW
Positive review for product

The website was very easy to maneuver and ordering was simple. The only problem I had was the time it took to get to me. I don't feel that was this company's fault, however. They shipped it in a timely manner but it happened to be during the holiday period. Would definitely use them again

A
AMANDA S.

Ashley Low Temp 140F Thermodisc Switch For Many Models, 80599

J
Johannes V.Z.
Worked as expected.

Worked as expected, fast delivery and awesome support.

A
Alex A.

Perfect transaction!

123