Skip to main content
Skip to main content
Product title:

US Stove 2400 and 2402 & 6041 Ignitor (prior to 10/11): 80543-AMP

Product rating:
Product price:
$29.99

A $20.00 Savings over the OEM

Product SKU ! 80543-AMP
Product MPN ! 80543
Product availability: In Stock
Bullet point features
John H. - Excellent price and service. I have ordered several times and each has been easy to order, delivered quickly, and always met expectations. An excellent place to do business with

Frequently Bought Together

Total Price: $72.96

Description

This replacement pellet stove igniter is 200 watts and the heater cartridge measures 3.5" long. See our stove compatibility TAB for proper stove fitment.

Fitment Note: This igniter works only for compatible units listed that are older than Oct 2011

Note: It is advised to always replace the door gasket whenever an igniter is replaced. air that enters the firebox from the door gasket causes delayed ignitions that ultimately causes igniters to fail. The door gasket for units that use this igniter is part 88066


Replacement For Part Number:

  • 80543

View Compatible Models

UPC: 012685805436

Compatible Models

    US Stove Company

  • 2400 Window
  • 6041
  • 6041HF
  • 6041I
  • 6041TP

Technical Specs

Watts 200
Length 3 1/2"
Width 3/8"
Connectors Female Leads

Instructions

Install Instructions For US Stove 2400 and 2402 & 6041 Ignitor (prior to 10/11): 80543-AMP
  1. Remove from power source
  2. Remove the rear panel
  3. Remove the two igniter wires
  4. Open the front door and remove the burnpot and agitator
  5. Remove the two screw from the igniter mounting bracket
  6. Install new igniter and connect the new igniter wires and reinstall the rear service panel
  7. Make sure you inspect the back of the controller for a blown fuse in position 1 and replace if needed.
  8. Reassemble the components inside of the stove and reconnect power.
  9. Plug the stove back into power


Troubleshooting

If your igniter is getting hot but mot igniting, make sure the damper below the burnpot is closed. If you are experiencing longer than usual ignition times consider replacing your door gasket.


If your igniter is not getting warm, your igniter has most likely failed and should be replaced.


Often, when igniter fails, the ignition fuse inside of the controller blows and should be inspected and replaced if necessary. These models have isolated fuses for each circuit. The ignition circuit should be in position 1. This is a 5 AMP, 125V rate fuse, click here to see the fuse.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $49!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This replacement pellet stove igniter is 200 watts and the heater cartridge measures 3.5" long. See our stove compatibility TAB for proper stove fitment.

Fitment Note: This igniter works only for compatible units listed that are older than Oct 2011

Note: It is advised to always replace the door gasket whenever an igniter is replaced. air that enters the firebox from the door gasket causes delayed ignitions that ultimately causes igniters to fail. The door gasket for units that use this igniter is part 88066


Replacement For Part Number:

  • 80543

View Compatible Models

UPC: 012685805436

Technical Specs

Watts 200
Length 3 1/2"
Width 3/8"
Connectors Female Leads

Instructions

Install Instructions For US Stove 2400 and 2402 & 6041 Ignitor (prior to 10/11): 80543-AMP
  1. Remove from power source
  2. Remove the rear panel
  3. Remove the two igniter wires
  4. Open the front door and remove the burnpot and agitator
  5. Remove the two screw from the igniter mounting bracket
  6. Install new igniter and connect the new igniter wires and reinstall the rear service panel
  7. Make sure you inspect the back of the controller for a blown fuse in position 1 and replace if needed.
  8. Reassemble the components inside of the stove and reconnect power.
  9. Plug the stove back into power


Troubleshooting

If your igniter is getting hot but mot igniting, make sure the damper below the burnpot is closed. If you are experiencing longer than usual ignition times consider replacing your door gasket.


If your igniter is not getting warm, your igniter has most likely failed and should be replaced.


Often, when igniter fails, the ignition fuse inside of the controller blows and should be inspected and replaced if necessary. These models have isolated fuses for each circuit. The ignition circuit should be in position 1. This is a 5 AMP, 125V rate fuse, click here to see the fuse.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $49!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
Fernanado Z.
Awesome

Great customer service and super fast shipping

A
Anonymous
Pellet stove ignitor

Part was shipped in a timely manner.
Arrived correct and worked. Very happy will order parts from here in the future

J
John H.
Excellent price and service

I have ordered several times and each has been easy to order, delivered quickly, and always met expectations. An excellent place to do business with

J
Joseph D.
Got it

Good service. Quick delivery.

A
Anonymous
right part

everything worked out great

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
Fernanado Z.
Awesome

Great customer service and super fast shipping

A
Anonymous
Pellet stove ignitor

Part was shipped in a timely manner.
Arrived correct and worked. Very happy will order parts from here in the future

J
John H.
Excellent price and service

I have ordered several times and each has been easy to order, delivered quickly, and always met expectations. An excellent place to do business with

J
Joseph D.
Got it

Good service. Quick delivery.

A
Anonymous
right part

everything worked out great

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid