Austroflamm Integra II i Pellet Insert Repair and Replacement Parts

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Combustion Blower for select Austroflamm and Rika stoves. The blower has 4 bolt holes in a square pattern, 4-3/8 inches apart. This part includes t...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This round 1/2" thick, black colored gasket is sold in five foot increments. Consult your stove manual to find out how many feet you will need. Be ...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Wire connector with 2 male spades and a Molex style connector.

Replacement combustion blower mounting gasket for Austroflamm pellet stoves. This part has an outside diameter of 6-1/2" and an inside diameter of ...

Compatible with Integra, Integra II, and Wega pellet stoves. Also a direct replacement for all Rika Pellet Stove versions of the Integra II

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

High limit, 250-degree switch for Austroflamm Integra pellet stoves This is an After Market Part. Ceramic, Surface Mount.

This is a Lo limit heat sensor. Temp Sensor 140 degree, Includes spacers for surface or hole mounting.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement low limit and fan switch gasket. This gasket works with any 3/4" discs.

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Austroflamm door gasket measuring: 1/2" X 7'

Replacement lower cast wall gasket for Austroflamm Integra Pellet Stoves.

Wire Stripper & Cutter Tool For Wire Sizes 10-22 AWG

Austroflamm Pellet Stove Replacement Fuse (3.15 Amp).  The fuse is a safety device that helps protect the electrical components on your stove/inser...

Replacement auger bushing for the Austroflamm Integra pellet stove.

Replacement convection blower for Austroflamm Integra pellet stoves made after 2006. This is a variable speed blower with two wires. The blower com...

Replacement bushing for some Austroflamm Integra pellet stoves blowers. This is the end bushing used to hold the squirrel cage of the convection bl...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement clip/cage nut for Austroflamm Integra pellet stoves. This is used with hex head bolts and center push nut retainer to hold lower cast w...

Replacement convection for Austroflamm Integra pellet stoves made before 2006. This is a variable speed blower with two wires and includes mounting...

Replacement center push nut retainer for Austroflamm Integra Pellet Stoves. This is used with hex head bolts and clip nuts to hold the lower cast w...

This is a replacement wiring adapter Ground Connector Ring to Female Spade Connector With 10" Wire and ring for #8 Screw.

Replacement circuit board for Austroflamm Integra pellet stoves made in 1992-2006. This board does not fit units made in 1991 or older.

This is a female bullet connector, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical com...

This is a male bullet connector, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical compo...

Replacement hex head cap bolt for Austroflamm Integra pellet stoves. Sold individually.

Replacement user control board for Austroflamm Integra pellet stoves made BEFORE 2006. Please Note: If the current board does not have utilize an i...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is a replacement wiring adapter Ground Connector Ring to Ground Connector Ring With 10" Wire

Replacement burn pot for Austroflamm pellet stoves.