Assembly Instructions For
Breckwell Wood Stove Ceramic Fiber Board (SW2100 & SW2.0): 88146
1.) Make sure the fire is completely out and your stove is cool to the touch.
2.) Open the main load door.
3.) Locate the retainer clip and bolt on the first reburn tube.
4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board (On some units, you may be able to carefully remove the board without removing any of the tubes).
5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).
6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle).
7.) Slide the old baffle out (If your model has a "Wool Blanket" that will be removed at this time).
8.) Position the new baffle in its place (Make sure the new baffle is positioned correctly. If it is too far forward it may cause issues with the burn).
8.) Reinstall any previously removed tubes, blankets, and retainer clips.
9.) Close the door.