Skip to main content
Skip to main content
Product title:

Enviro Igniter (300W): 50-1067-AMP

Product rating:
Product price:
$34.99

A $225.00 Savings over the OEM

Product SKU ! 50-1067-AMP
Product MPN ! 50-1067
Product availability: In Stock
Bullet point features

Description

Replacement Enviro 300W Ignitor for Select Enviro Stoves, See Compatible. 

NOTE: If your stove uses the pin style igniter you can upgrade to this wired igniter by installing this part in place of the halogen cycle socket and the pin igniter.

Compatibility Notes: 

Enviro Pellet Stoves:

  • EF2 (Stoves built in July '94 and newer)
  • EF3 (Stoves built in July '94 and newer)

    Replacement For Part Numbers:

    • 50-1067
    • GF55-004
    • 50-685

    View Compatible Models

    Compatible Models

      Enviro

    • EF2 FS
    • EF3
    • EF3Bi
    • EF4 FS
    • Meridian-2 FS
    • Solus

    Technical Specs

    Watts 300
    Length 4"
    Width 3/8"
    Connectors Female Spades

    Videos

    Instructions

    Troubleshooting

    It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

    Troubleshooting Igniters:

    Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

    For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

    If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    This Item Qualifies For Free Shipping With Orders Over $199!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    Replacement Enviro 300W Ignitor for Select Enviro Stoves, See Compatible. 

    NOTE: If your stove uses the pin style igniter you can upgrade to this wired igniter by installing this part in place of the halogen cycle socket and the pin igniter.

    Compatibility Notes: 

    Enviro Pellet Stoves:

    • EF2 (Stoves built in July '94 and newer)
    • EF3 (Stoves built in July '94 and newer)

      Replacement For Part Numbers:

      • 50-1067
      • GF55-004
      • 50-685

      View Compatible Models

      Technical Specs

      Watts 300
      Length 4"
      Width 3/8"
      Connectors Female Spades

      Video

      Troubleshooting

      It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

      Troubleshooting Igniters:

      Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

      For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

      If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

      Warranty

      Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

      Shipping Info

      This Item Qualifies For Free Shipping With Orders Over $199!

      When Will My Order Ship?

      All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

      Do You Offer Express Shipping?

      Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

      How Does Free Shipping Work?

      Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

      Do You Ship To Canada?

      We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

      Do You Ship To Alaska Or Hawaii?

      We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

      Do You Ship Outside The US Or Canada?

      Unfortunately, at this time we do not offer international shipping other than to Canada.

      Shipping Time Estimations

      For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

      Learn More About Our Shipping Information

      Customer Reviews

      Based on 62 reviews
      97%
      (60)
      3%
      (2)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      p
      paul k.
      GREAT PARTS STORE TO DO BUSINESS WITH

      HAVING TO REPLACE SOME PARTS IN MY PELLET STOVE I HAVE USED STOVE PARTS FOR LESS 4 TIMES AND HAVE NO PROBLEM WITH THEIR PRODUCTS OR SERVICE AND DELIVERY GOOD PLACE TO DO BUSINESS WITH. A HAPPY CUSTOMER

      C
      Craig F.

      Fast delivery,quality parts at a great price

      L
      Leslie H.
      Igniter

      Seems to be of good quality. The wires were longer which made it nicer to hook back up. Also it fixed my re-liting issue I was having. Would buy from again if needed. Fast shipping also.

      D
      Doug B.
      "Up and Running"

      The igniter quit and had to order another one...local pellet stove supply said nobody made them any more...just have to scrap it out...called Stove and Gr.....they had one and it was here in a week....my pellet stove is now happy along with the good wife. Good service and price for the igniter!

      J
      Jose F.
      Works well

      Perfect replacement/fit and function

      QUESTIONS & ANSWERS

      If your question does not concern this specific product, use our contact form
      Ask a Question
      • How do I replace ef3 igniter

        Hi,
        Here is a youtube video that will give an idea on how to approach your Enviro EF3 Igniter replacement project.
        Enviro Service Video

      • does this come with the two little screws

        No, you have to reuse your screws.

      Customer Reviews

      Based on 62 reviews
      97%
      (60)
      3%
      (2)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      p
      paul k.
      GREAT PARTS STORE TO DO BUSINESS WITH

      HAVING TO REPLACE SOME PARTS IN MY PELLET STOVE I HAVE USED STOVE PARTS FOR LESS 4 TIMES AND HAVE NO PROBLEM WITH THEIR PRODUCTS OR SERVICE AND DELIVERY GOOD PLACE TO DO BUSINESS WITH. A HAPPY CUSTOMER

      C
      Craig F.

      Fast delivery,quality parts at a great price

      L
      Leslie H.
      Igniter

      Seems to be of good quality. The wires were longer which made it nicer to hook back up. Also it fixed my re-liting issue I was having. Would buy from again if needed. Fast shipping also.

      D
      Doug B.
      "Up and Running"

      The igniter quit and had to order another one...local pellet stove supply said nobody made them any more...just have to scrap it out...called Stove and Gr.....they had one and it was here in a week....my pellet stove is now happy along with the good wife. Good service and price for the igniter!

      J
      Jose F.
      Works well

      Perfect replacement/fit and function