Enviro Fan Controller Rheostat with Knob (115V): EF-045-AMP

Enviro Replacement Fan Controller with Knob (115V) for Select Enviro Stoves, See Compatible. 

Replacement For Part Number:

• EF-045

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Enviro Fan Controller Rheostat with Knob (115V): EF-045-AMP

Instructional Documents

• Install Instructions PDF for Enviro EF-045

Instructional Notes

1.) Unplug the unit's power cord.

2.) Locate the rheostat control. On some units, the assembly may be exposed. On others, you may need to remove a cover plate or side shield to gain access.

3.) Simply disconnect the spade connectors coming from the rheostat and remove it. You may need to remove the rheostat knob in order to do this.

4.) Connect to spade connectors on the new rheostat to the leads coming off the unit.

5.) Position the new rheostat in place.

5.) Reinstall the knob and any previously removed cover plates or shields.

Troubleshooting Notes

If your rheostat is not adjusting the fan speed correctly or you are experiencing reduced airflow, it may need to be replaced. Before replacement, please review the information below.

If your distribution blower does not seem to be moving the same amount of air as it once did, inspect and clean the blower. Distribution blowers will often draw dust and pet hair into the blades of the fan when operating.

If the blower continues to rotate at a slower speed after it has been cleaned or you hear excessive noise coming from the fan it may need to be replaced.

This Item Qualifies For Free Shipping With Orders Over $99!