Skip to main content
Product title:

US Stove Distribution Blower: 80472-AMP

Product rating:
Product price:
$179.99

A $70.00 Savings over the OEM

Product SKU ! SP4L-80472
Product MPN ! 80472A
Product availability: In Stock
Bullet point features
'Just can’t get over how quiet the replacement blower is. Should have done this months ago. And grateful it was shipped so fast in the midst of a busy holiday season.-Ed H."

Frequently Bought Together

Total Price: $209.97

Description

USSC Pellet Stove (Convection/Room) Blower.  The convection blower is responsible for circulating air around the stove and into room.  If the blower is not working as it should, the amount of heat transferred from the unit into your home may be reduced.  A malfunctioning blower can also cause high-limit switches to trip and error codes.  If the fan has been cleaned thoroughly and is not moving the same volume of air as it once did, it may need to be replaced.

 

 


Replacement For Part Numbers:

  • 80472A
  • 80472
  • 80453

View Compatible Models

UPC: 012685804729

Compatible Models

    Golden Eagle

  • 5520

    King

  • KP5522
  • KP130

    US Stove Company

  • 5500
  • 5500M
  • 5500XL
  • 5502M
  • 5510
  • 5520
  • 6033
  • 6035
  • 6037
  • 6039
  • 6039HF
  • 6039T
  • 6041
  • 6041HF
  • 6041I
  • 6041TP

Technical Specs

Volts 115
Amps 1.35
RPM 2000

Instructions

Install Instructions For US Stove Distribution Blower: 80472-AMP
  1. Unplug the unit from the power source
  2. Remove the rear panel, you may need to remove the venting from the unit depending upon your installation
  3. Remove the side panel which has the the controller.
  4. Disconnect all of the wires from the controller and set the panel aside
  5. Remove the wires for the blower which is located behind the control area
  6. Remove the blower mounting screws from the rear wall of the stove
  7. Install your new blower with a new gasket
  8. Reconnect the blower wiring
  9. Reconnect the wires to the the controller (molex to molex fitting, brown wires to pressure switch BC3, BC4, white and gray wires to igniter tabs at J4 and J5, heat sensor to upper white terminal block) and then reinstall the panel.
  10. Reconnect rear panel, venting and power cord.

Troubleshooting

If your stove does not want to start up after you have performed this replacement or have removed the side service panel, make sure the top white wires are firmly attached to the white "Heat Sensor" block. There's not much slack in the wiring harness and often times the connect will fall off when reinstalling the side panel.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

USSC Pellet Stove (Convection/Room) Blower.  The convection blower is responsible for circulating air around the stove and into room.  If the blower is not working as it should, the amount of heat transferred from the unit into your home may be reduced.  A malfunctioning blower can also cause high-limit switches to trip and error codes.  If the fan has been cleaned thoroughly and is not moving the same volume of air as it once did, it may need to be replaced.

 

 


Replacement For Part Numbers:

  • 80472A
  • 80472
  • 80453

View Compatible Models

UPC: 012685804729

Compatible Models

    Golden Eagle

  • 5520

    King

  • KP5522
  • KP130

    US Stove Company

  • 5500
  • 5500M
  • 5500XL
  • 5502M
  • 5510
  • 5520
  • 6033
  • 6035
  • 6037
  • 6039
  • 6039HF
  • 6039T
  • 6041
  • 6041HF
  • 6041I
  • 6041TP

Technical Specs

Volts 115
Amps 1.35
RPM 2000

Instructions

Install Instructions For US Stove Distribution Blower: 80472-AMP
  1. Unplug the unit from the power source
  2. Remove the rear panel, you may need to remove the venting from the unit depending upon your installation
  3. Remove the side panel which has the the controller.
  4. Disconnect all of the wires from the controller and set the panel aside
  5. Remove the wires for the blower which is located behind the control area
  6. Remove the blower mounting screws from the rear wall of the stove
  7. Install your new blower with a new gasket
  8. Reconnect the blower wiring
  9. Reconnect the wires to the the controller (molex to molex fitting, brown wires to pressure switch BC3, BC4, white and gray wires to igniter tabs at J4 and J5, heat sensor to upper white terminal block) and then reinstall the panel.
  10. Reconnect rear panel, venting and power cord.

Troubleshooting

If your stove does not want to start up after you have performed this replacement or have removed the side service panel, make sure the top white wires are firmly attached to the white "Heat Sensor" block. There's not much slack in the wiring harness and often times the connect will fall off when reinstalling the side panel.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 53 reviews
92%
(49)
8%
(4)
0%
(0)
0%
(0)
0%
(0)
R
Richard P.S.

US Stove Distribution Blower: 80472-AMP

J
Jackie C.
US Stove Distribution Blower: 80472-AMP and US Stove Brick Herringbone: 891139

Everything was just perfect......We received our part overnight and installed it right away. We were able to be nice and warm that same night.... The packing was done very well also. I found your store when we were looking for the back herringbone panel for our stove and I am so very thankful we did. Thank you very much for the wonderful service and the great prices....

M
Mark m.

Vogelzang Pellet Stove Distribution Blower: 80472-AMP

T
Travis T.
Amazing!!

Everything my fiancé and I have ordered off of this site has been reliable, works great, and we have never had to wait to long for a part normally it arrives within a few days.

J
James F.
Blower 80472

Great customer service and shipping. Thank You !!!

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • Does this fit USSC King Model 5502m?

    Yes.

  • does it fit ussc 5660

    No, According to the manual for the USSC  Bay Front Pellet Stove Model 5660, you will need this convection blower: 80622

  • Is this part the same as a 80472 Convection Blower, AMP 20147?

    Part #80472 and #80472A are convection/ room blowers for United States Stove Company. AMP20147 is our direct aftermarket replacement part.

  • does this fit the 5500,

    Yes

Customer Reviews

Based on 53 reviews
92%
(49)
8%
(4)
0%
(0)
0%
(0)
0%
(0)
R
Richard P.S.

US Stove Distribution Blower: 80472-AMP

J
Jackie C.
US Stove Distribution Blower: 80472-AMP and US Stove Brick Herringbone: 891139

Everything was just perfect......We received our part overnight and installed it right away. We were able to be nice and warm that same night.... The packing was done very well also. I found your store when we were looking for the back herringbone panel for our stove and I am so very thankful we did. Thank you very much for the wonderful service and the great prices....

M
Mark m.

Vogelzang Pellet Stove Distribution Blower: 80472-AMP

T
Travis T.
Amazing!!

Everything my fiancé and I have ordered off of this site has been reliable, works great, and we have never had to wait to long for a part normally it arrives within a few days.

J
James F.
Blower 80472

Great customer service and shipping. Thank You !!!

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid