US Stove 5500XL Pellet Stove Repair and Replacement Parts

US Stove Company Rope Door Gasket (5/8" x 6').  It is important that there is a good seal between the door and the body of your stove.  A poor seal...

Replacement USSC Auger Pin for: fits many models (see compatible stoves).

US Stove Company Stove Auger Shaft Replacement Auger For US Stove Company. USSC Pellet Stove Auger Shaft Replacement Part # 891141.

USSC Pellet Stove (Convection/Room) Blower.  The convection blower is responsible for circulating air around the stove and into room.  If the blowe...

US Stove Company Pellet / Wood Stove Glass Window Gasket. The glass gasket provides a tight seal between the door glass and door frame.  A leak aro...

US Stove Company (Pellet) Exhaust Blower Gasket.  This gasket seals between the exhaust blower housing and the unit.  It is important to inspect th...

US Stoves (USSC) Replacement Bushing for Agitator for units: 5500M, 5500XLT, 5510, 5520, American Harvest 6039 Series, American Harvest 6041 Series...

USSC Pellet Stove Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  ...

US Stove Company Pellet Stove Ignitor

Burn Grate 3-5/8 wide, Stainless Steel, After Market Part is identical to OEM part. Fits: US Stove/King 5510, 5500M, 5502M, 5500XL, 5500XLT, and more.

Replacement Air Pressure Switch for many USSC and King pellet stoves. Instructions Attach vacuum hose to white negative(-) port.

US Stove Company USSC Replacement Bushing Retaining Washer. Compatible with many Pellet Stoves.

USSC Pellet Stove Distribution Blower Gasket.  This gasket installs between the unit and convection/distribution blower.  The gasket creates a seal...

This 1 R.P.M. Agitator Motor *Turns counter-clockwise* for US Stove and King Pellet heaters. Drives the agitator shaft to stir the pellets. Fits th...

USSC Pellet Stove Exhaust Blower Motor Assembly (Fasco).  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustio...

Replacement USSC Ignitor Gasket Flange For Many Models (See Compatible Stoves). Part Number: 88188  

Replacement USSC Temperature Sensor For: 6220 American Harvest, 6100 American Harvest, 5510 King, 5500M King, And 5500Xlt King.

This 1 R.P.M. Auger Motor *Turns counter-clockwise* for US Stove and King Pellet heaters. Fits the following units: 5500M, 5510, 5520, 6041, 6041HF...

USSC Pellet Stove Power Supply Cord.  This cord is the main connection responsible for bringing power to the stove. The cord plugs into the stove's...

USSC (Wood/Pellet) Stove Door Glass.  The glass on your stove allows you to view the fire and helps transfer heat into the room.  It is important t...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is the replacement for the Discontinued 80558 controller. There may be some slight differences with the wiring connectors. The Circuit Board I...

Replacement US Stove Company (USSC) Pellet Stove Vacuum Pressure Switch Hose For Many Models. 12" Length (1 Foot).

Replacement Micro Door Switch Previous Part number C-E-901 

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

US Stove Company Pellet Stove Ignitor

USSC Pellet Stove Distribution Blower Gasket (Silicone).  This gasket installs between the unit and convection/distribution blower.  The gasket cre...

Replacement USSC Exhaust Duct Gasket For: 5500 Series Stoves Outer Dimensions: 5-3/4" x 4-5/8" Inner Dimensions: 5-1/8" x 2"

Genuine OEM US Stove Company Pellet Stove Auger Shaft.  The auger shaft attaches to the feed motor.  When rotating, the auger delivers pellets from...

Breckwell Pellet Stove Distribution Blower.  This blower circulates air around the stove and across the heat exchanger.  This fan is responsible fo...

This is a 1 R.P.M. Auger Motor *Turns counter-clockwise* for US Stove and King Pellet heaters. Fits many models.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement USSC Temperature Sensor For: 6220 American Harvest, 6100 American Harvest, 5510 King, 5500M King, And 5500Xlt King.

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

US Stove Company 6" Round (Pellet Stove) Combustion Blower Gasket. The combustion blower gasket makes a seal between the combustion blower and blow...

Replacement USSC Auger Bushing Plate Assembly For the Following Models: King Pellet Stoves: 5500M 5500XLT 5510 5502M US Stove Pellet Stoves: 604...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

USSC Pellet Stove OEM Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stov...

Wire connector with 2 male spades and a Molex style connector.

Replacement Air Pressure Switch for many USSC and King pellet stoves.

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Replacement USSC Brass Spring Door Handle For: Many Models (See Compatible Stoves). Part Number: 89930  

This is the 1A fuse needed for the agitator motor and the auger motor. Each motor has its own fuse holder on the back of the control board and each...

Genuine replacement USSC / King Auger Bushing Plate Assembly For select pellet stoves.  

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is the 5A fuse needed for the ignitor, the exhaust blower, and the room/convection blower. Each part has its own fuse holder on the back of th...