Hearthstone Manchester 8360 & 8362 Front Door Latch Kit: 93-73600-AMP

Replacement front door latch assembly for Hearthstone Manchester 8360 and 8362 wood stoves. The door latch is an import part of the stove. This latch helps to create an airtight seal between the door and body of the unit. A worn door latch can allow smoke to enter the room, reduce your stoves efficiency and cause the stove to over fire.

This kit uses aftermarket parts where applicable to help you save big!

Replacement For Part Number:

• 93-73600

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 5 total items.

Component Technical Specs

Open a part to see its specifications.

1 xHearthstone Handle Spring For Many Models

SKU 5240-138 (opens in new tab)

Quantity In Kit	1
Length (in)	¾"
Width (in)	¾"
Height (in)	⁷⁄₁₆"
Weight	0.50 oz

1 xHearthstone Handle Washer For Many Models

SKU 5021-032 (opens in new tab)

Quantity In Kit	1
Length (in)	¹¹⁄₁₆"
Width (in)	¹¹⁄₁₆"
Height (in)	.1"
Outer Diameter (in)	1"
Inner Diameter (in)	0.406"
Weight	0.25 oz

1 xHearthstone Handle Spacers Fits Many Models (SOLD IN 4 PACKS)

SKU 4700-0790 (opens in new tab)

Quantity In Kit	1
Length (in)	¾"
Width (in)	½"
Height (in)	⅛"
Weight	0.25 oz

1 xHearthstone Manchester Front Door Latch

SKU 5360-068 (opens in new tab)

Quantity In Kit	1
Length (in)	2 ⅜"
Width (in)	1 ⅜"
Height (in)	⅜"
Weight	1.5 oz

1 xBlack Oxide Alloy Steel Cup-tip Set Screw for Shafts and Collars

SKU 4500-2975 (opens in new tab)

Quantity In Kit	1
Length (in)	⅜"
Width (in)	⅛"
Height (in)	⅛"
Weight	1.00 oz

Install Instructions For Hearthstone Manchester 8360 & 8362 Front Door Latch Kit: 93-73600-AMP

Instructional Documents

• Install Instructions PDF for Hearthstone 93-73600

Instructional Notes

1. Remove the set screw on the outside of the cast iron crank assembly with the 5/32” allen wrench.

2. Turn the cast crank counterclockwise until it separates from the threaded latch shaft. Retain the cast iron crank for the reassembly.

3. Push the latch shaft through the door and discard the original latch, washers, and coil spring.

4. Place two of the adjustment washers onto the new latch shaft (an extra washer is included in the kit).

5. Apply a small amount of high temp grease to the smooth area of the shaft.

6. Push the latch through the hole in the door and slide the 1” OD washer over the outside portion now sticking through the door. 

7. Place the coil spring onto the latch on top of the 1” OD washer.

8. Thread the cast iron crank back onto the latch shaft until it is about 1/8” from the surface of the door. Line the hole in the crank up over the groove in the shaft and lock the pieces together by turning in the setscrew. The tab on the end of the setscrew will insert into the notched groove in the edge of the latch shaft. Tighten the assembly with the allen wrench.

This Item Qualifies For Free Shipping With Orders Over $99!