Green Mountain Grills Jim Bowie Choice Grill Repair and Replacement Parts

Replacement 110V 200 Watt plug n' play igniter

Replacement thermal regulates the temperature by adjusting air and pellet flow. Extreme high heat heavy duty wire. Full length wire is approx. 18"

Self-curing our best BBQ smoker adhesive Food safe RTV 650 F BBQ grill smoker sealer Hi Temp Silicon adhesive.650F max (intermittent temp) rtv sili...

Replacement fan blade for the combustion fan. For pellet grills jim bowie & daniel boone.

Replacement Temperature Probe is a perfect addition to your grill accessory collection! Cook your meats to the perfect temperature every time with ...

Replacement 5AMP fuse for the circuit board.

Replacement Antenna for the GMG WiFi Control Circuit Board. Fits Davy Crockett, Daniel Boone & Jim Bowie WiFi Control boards. You must have a W...

Replacement 110V 200 Watt plug n' play igniter.

Replacement power cord for the jim bowie & daniel boone

Replacement 18" Auger Shaft for Daniel Boone & Jim Bowie Choice Pellet Grills, that had an offset firebox (left side fire pot), compatible with...

This part is for the #1 leg and wheel. These are placed on the control board side of the grill. This is just 1 leg and wheel if you need 2 change t...

 Genuine Green Mountain Grills Replacement Chimney Docking/Mount Gasket. Made from the highest quality fire rated materials Thick and Sturdy for a ...

Replacement Hopper Gasket for Green Mountain Jim Bowie & Daniel Boone Prime, Prime Plus & Choice Pellet Grills.

Pellet Grill Chimney Pipe Hardware Set Includes 3 Bolts, 3 Nuts & 6 Washers. Some models of grills require 2 bolts and some 3 bolts.  

Replacement combustion fan and housing assembly with wire harness. 110V AC, 60Hz  5" Housing Diameter 3 3/4" Fan Blade

Replacement complete auger assembly for the Daniel Boone & Jim Bowie grills that have a 10-3/8" auger tube with off-center burn pot position. I...

Replacement 110V Auger Motor with a T-Pin for Green Mountain Jim Bowie & Daniel Boone Choice Pellet Grills. This motor has a "T" pin style mou...

Replacement Auger Bushing for Green Mountain Daniel Boone & Jim Bowie Prime & Prime Plus Pellet Grills. This bushing is also required to up...

Replacement gasket is placed between combustion fan assembly and underside of the grill as well as on the firebox. Failed gaskets may cause soot or...

Green Mountain Chimney Smoke Stack For Daniel Boone & Jim Bowie Grill, P-1044

This stainless chimney smoke stack cap fits the Jim bowie & daniel Boone grill.

Replacement 5.3 RPM, Cotter Pin Style, Auger Drive Motor Includes the Mounting Bracket. This Heavy Duty Motor works with the Jim Bowie & Daniel...

This complete unit comes assembled with the auger motor, gearbox, auger shaft, and auger bit together. This assembly is for Jim Bowie grills that h...

Replacement combustion fan/ fuel sensor wiring. This is 1 of the 2 blue wires required for the combustion blower and fuel sensor wires. Factory har...

Genuine Replacement Low Fuel Hopper Alarm for the GMG Daniel Boone & Jim Bowie, Remote, and WiFi operated models. Please Note: If your Daniel B...

This is the Green Mountain Grill Auger with notches for T-pin style auger motor for the Jim Bowie Pellet Grill. Length: 23"

Green Mountain Old Style Hopper Fan For Jim Bowie & Daniel Boone Grills 110V AC, 60Hz Part Number: P-1075

Replacement wiring harness with male plugs. Fits the Daniel Boone & Jim Bowie.

Replacement thermal regulates the temperature by adjusting air and pellet flow. Extreme high heat heavy duty wire. Full length wire is approx. 18"

Using a cover helps to keep water away from parts that may rust. Also, serves as a barrier against pollen, dust, and dirt that can get caked on you...

This is the steel firebox / burnpot for the Green Mountain Grills Jim Bowie and Daniel Boone Choice model Pellet Grills only. If you have the Prime...

This is the Hopper lid for the Green Mountain Grills Jim Bowie and Daniel Boone Pellet Grills.  Dimension: 10.25" x 10.5" x 1" approx. 

Pellet Grill Chimney Pipe Hardware Set Includes 3 Bolts, 3 Nuts & 6 Washers. Some models of grills require 2 bolts and some 3 bolts.  

Replacement auger bushing for the daniel boone & jim bowie grills. Approx 9/16 top of bushing 1/2 bottom of bushing.

This is the grease bucket that hangs from the grease drain on the Green Mountain Grill Jim Bowie and Daniel Boone Pellet Grills.

Replacement temperature Probe is a perfect addition to your grill accessory collection! Cook your meats to perfect temperature every time with no g...

Replacement WiFi Control Circuit Board Assembly for the GMG Jim Bowie Choice Model  

Replacement Auger Drive Motor Fan Blade. This blade fits on the auger motor to help cool off the motor. Works with the jim bowie & daniel boone...

Replacement lid handle fits the Jim Bowie Choice Pellet grill.This handle is for Jim Bowie Pellet grill with serial numbers that do not begin with ...

These liners are for the Green Mountain Grill Jim Bowie Pellet Grill. Place the stack of 3 liners on your grease tray to collect drippings. As nee...

Replacement hopper fan blower  110V AC, 60Hz

Replacement new style hopper handle end for the daniel boone and jim bowie grill.

Replacement Stainless Steel Pellet Dump Door with Screw for Green Mountain Pellet Grills.

Replacement 110V Non-WiFi Controller for Green Mountain Jim Bowie Choice Pellet Grills.

This is the stainless steel heat shield for the Green Mountain Grill Jim Bowie Choice pellet grills with the centered pot. Dimensions:  17.75" x 13...

Replacement set of one A2-70 (M6x20mm) bolt, one spring lock washer and one flat washer for mounting parts on Green Mountain Pellet Grills. On Prim...

Replacement Side Tray for Daniel Boone & Jim Bowie Choice Pellet Grills.

Utilize our 1 piece Stainless Steel Grease Tray for convection style cooking on your Jim Bowie model. Pellet grilling has never been more versatile.