Lennox PS40 Pellet Stove Repair and Replacement Parts

Replacement 6" Exhaust Motor Gasket.   **Motor side 4 7/8" ID 6" OD** Note: This will fit stove models that have the 5 3/4" quick change style hub...

Whitfield 12046300 Auger Motor Advantage I (WP2) Advantage II (WP2) Advantage II-T (WP2) Advantage III (WP2) Advantage II-T Classic (WP2) Advantag...

Replacement low limit proof of fire snap switch for select Whitfield and Lennox pellet stoves. This switch controls the stove out of "STARTUP" mod...

Lennox Ignitor and Hose Clamp: PI & PS40 Part# H6005 We sell the Lennox replacement ignitor with an included hose clamp for Country Pellet Sto...

Lennox Combustion Gasket Motor To Housing Fits between the motor and the housing For Lennox Winslow PS40/PI40 Part #H5903 Looking for more great ...

Winslow Stove Igniter with Hose Clamp #H6005   We sell the Lennox replacement ignitor with an included hose clamp for Country Pellet Stoves. The L...

PS40 Ash Drawer Gasket, 6 ½' Ash Door Gasket for Lennox/ Whitfield PS40.

Lennox Winslow Convection Blower Snap Switch Part H5875

Winslow Country Stove Over Temperature Snap Switch This is a replacement Lennox, resettable over temperature snap switch. This switch is a safety s...

Replacement combustion quick disconnect square gasket for select Whitfield and Lennox pellet stoves. This gasket goes between the venting applianc...

Lennox PI40 & PS40 Room Blower Gasket for Convection Fan

Vacuum Switch for the Winslow PS40 Pellet Stove and PI40 Pellet Insert. The Manufacturer has changed from Country to Lennox and now it's Iron Strik...

Lennox 7ft Door Gasket PI/PS40 Lennox Replacement Door Gasket for Winslow Free Standing and Insert Pellet stove. Needs gasket cement for installati...

Ignition Fuse for Lennox Pellet Stoves: PI40/PS40, Bella

Vacuum Switch for Winslow Country Stove. The brand name has changed from Country to Lennox and now it's Iron Strike, but the stoves have remained ...

Replacement auger motor for select Whitfield and Lennox pellet stoves. The auger motor turns the auger and moves pellets from the hopper to the bu...

Replacement low limit proof of fire snap switch for select Whitfield and Lennox pellet stoves. This switch controls the stove out of "STARTUP" mode...

Lennox Winslow PS40/PI40 Combustion Gasket Housing to stove Order Replacement Lennox Winslow PS40/PI40 Stove Combustion Gasket Housing to stove par...

Replacement cast iron burn pot for Lennox Winslow PS40, PI40 and Bella pellet stoves

Country Winslow Convection Blower Room Air PS40 Part #H5884 Convection Blower Room Air for Lennox stoves. The Convection Blower pulls the rooms coo...

Replacement air sensor switch pressure hose for select Lennox and Whitfield pellet stoves. This hose connects to the outlet on the combustion moto...

Winslow Country PS40 Combustion Blower Combustion Blower for Winslow Country Pellet Stove Part #H6018 comes with the gasket combustion to stove. ...

Replacement 1RPM auger motor for select Lennox pellet stoves. The auger motor turns the auger and moves the pellets from the hopper to the burn po...

Fits the following Lennox/Country Pellet Stoves stoves: PI/PS40.  Terrific Deals on Pellet Stoves Parts, Check Out Our Huge Selection with Same-Day...

High-Limit Overtemp Switch Snap Switch for IHP, Lennox, Country, Winslow PS40 pellet stove and PI40 pellet insert with manual reset.  This is a sa...

3AMP Control Board Fuse NOT Igniter Fuse for Lennox Bella and Winslow PS40/PI40. This is the main control fuse on the controller. If this fuse is b...

Aftermarket Replacement Low Limit Heat Sensor for Country Stoves PI, PS40  H5887. It is a Ceramic heat sensor up to 140°F /60°C.

Replacement 1RPM auger motor for select Lennox pellet stoves. The auger motor turns the auger and moves the pellets from the hopper to the burn po...

Lennox Convection Blower Snap Switch compatible with: Winslow PS40, Winslow PI40, Bella

Log Set for Winslow Country Pellet Stove. Models: PI40 and PS40. Fits both the Insert and Free Standing Models.

Replacement low limit proof of fire snap switch for select Whitfield and Lennox pellet stoves. This switch controls the stove out of "STARTUP" mod...

Brick Panel for Winslow Country PI40 or PS40, by Lennox # 79030

Replacement RCL-T (Deluxe) LCD remote thermostat for Lennox gas stoves, fireplaces, and inserts. It also works with most pellet stoves. The receive...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Replacement Cleaning Brush for Whitfield and Lennox pellet stoves.

Lennox auger w/ lower bearing for a PI/PS40 .

This Diagnostic Tool is For the Following Lennox Models: Bella, Winslow PI40 & PS40

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Lo Limit Heat Sensor 140 degrees, Phenolic, includes spacers for surface or whole mounting. Fits Whitfield: Cascade

lennox remote, two buttons, timer, on/off or timer mode for stoves: Bella, montage, Winslow f.s. winslow insert includes a hand-held transmitter, a...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...