Pleasant Hearth PH35PS Pellet Stove Repair and Replacement Parts

Replacement igniter for compatible Pleasant Hearth pellet stoves. 110/120V AC. Measurement from hub 4 1/4″, Total Length of element 5″ 13″ Lead Wi...

This bearing assembly is used on the SRV7000-659 convection blower. The oiled-brass bearing is designed to be maintenance-free (no lubrication requ...

Pleasant Hearth Pellet Stove Feed Motor, SRV7000-670

Replacement Convection Blower for Pleasant Hearth models including PH50, PH35, and PH50cabps. Overall length is approx 17-1/2" Length. Length witho...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement firepot with upgraded stainless steel construction for compatible Pleasant Hearth pellet stoves.

Replacement dial control for Pleasant Hearth PH35PS, PH50PS, and PH50CABPS. Includes bracket, mounting hardware not included. Dial control wire cab...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Replacement door rope gasket for Pleasant Hearth pellet stoves. Gasket measures 3/4" thick x 7' long.

Replacement Pleasant Hearth Snap Switch with manual reset button.

Genuine original replacement igniter for compatible Pleasant Hearth pellet stoves. 110/120V AC. Measurement from hub 4 3/16″, Total Length of elem...

This Quadra-Fire  6" round combustion motor hub gasket is made from 100% silicone and has been designed to outlast typical gasket material; allowin...

Pleasant Hearth Pellet Stove Vacuum Switch Replacement Pleasant Hearth pellet stove Vacuum Pressure Switch. If the switch senses a safety error tha...

Replacement ambient temperature sensor probe for compatible Pleasant Hearth pellet stoves.

Replacement exhaust blower that works with the PH35PS only. Its a "quick change" style. **Typically does not require removal of exhaust blower hous...

Hopper Lid Switch For Pleasant Hearth Pellet Stoves, SRV7000-612 Fits the Following Pleasant Hearth Models: PH35PS PH50PS PH50CABPS

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement Exhaust Probe for all Pleasant Hearth pellet stoves.

Replacement glass for Pleasant Hearth pellet stoves. Please refer to your owner's manual before ordering. High quality ceramic glass made in the ...

Replacement Pleasant Hearth PH35PS Circuit Control Board. White plastic standoffs are included for mounting board to inside back of pellet stove.

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Replacement feeder assembly kit for compatible Pleasant Hearth pellet stoves.Kit Includes: Auger Motor SRV7000-670 Auger Bearing Plates Auger Shaf...

6" AMP Stove Exhaust Motor Gasket Motor side 4 7/8" ID 6" OD For use between blower housing and exhaust motor. ***note this will fit stove mode...

Wire connector with 2 male spades and a Molex style connector.

Genuine original replacement feeder assembly kit for compatible Pleasant Hearth pellet stoves.Kit Includes: Auger Motor SRV7000-670 Auger Bearing ...

Pleasant Hearth Pellet Stove Vacuum Switch This pellet stove replacement part includes both hoses and the Vacuum Pressure Switch. If the switch sen...

Pleasant Hearth Combustion/ Exhaust Blower Motor Housing Gasket

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Replacement Pleasant Hearth Snap Switch with manual reset button.

This is the connection wire that goes between the motherboard and the dial controller for the PH35PS pellet stove models.

Pleasant Hearth Feed Assembly Bushing Fits All Models, 7000-600 Dimensions: 3/4" (19mm) OD 1/2" (12mm) ID Sold Individually.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement Exhaust Probe for all Pleasant Hearth pellet stoves.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement feed / auger spring for Pleasant Hearth pellet stoves for models PH35PS, PH50PS and PH50CABPS.

Genuine original replacement ambient temperature sensor probe for compatible Pleasant Hearth pellet stoves.

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement black door handle assembly for Pleasant Hearth models hardware included.

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement 3 Prong Power Cord for all Pleasant Hearth pellet stoves.

Replacement Convection Blower for Pleasant Hearth models including PH50, PH35, and PH50cabps. Overall length is approx 17-1/2" Length. Length witho...

Replacement PelPro Combustion Exhaust Blower with housing for PH35PS

Wire Stripper & Cutter Tool For Wire Sizes 10-22 AWG

Replacement feed motor gasket for compatible Pleasant Hearth pellet stoves.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...