PelPro Bayview INS PPBW2GD Pellet Insert Repair and Replacement Parts

This is an OEM Replacement Convection Blower for Pelpro pellet stoves manufactured after August 2013. Includes Gasket.  Part Number: KS-5020-1052

Replacement Pel Pro Pellet Stove Ignitor. KS-5030-1061 110 Volts 300 Watts 5 inches long by 3/8 inch diameter

Replacement Convection Blower GASKET for Pelpro pellet stoves manufactured after August 2013. Part Number: KS-5020-1052-GASKET

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Replacement Aftermarket Vacuum Switch Kit Replaces part numbers: KS-5090-1310 and ACPRSW Fits all PelPro pellet stoves that have the Acutron contro...

Replacement Door Gasket 3/4" x 60", fits Pel Pro pellet stoves that use the Acutron control board.

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

Replacement F110-20F Low Limit Snap Switch Thermodisc for PelPro pellet stoves that feature the DHC board. This limit switch is mounted on the exha...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement Glass Gasket Is 5/8" x 12 Inches. Replacement Glass Gasket for many Pel Pro Pellet Stoves. The gasket is 12" long and is designed to be...

Replacement firebrick panel for PelPro pellet stoves. Fits the following models: Bayview FS Bayview Insert FPP2BD FPPST4BD FPPBW2GD IPPBW2GD HHPP2...

Replacement Combustion Blower Assembly for all PelPro Models made prior to the 2014 HHT acquisition of PelPro. The original item number KS-5020-104...

Replacement firebrick panel for PelPro pellet stoves.fits all Glow Boy pellet stoves made by Dansons. Replaces #KS-5050-1130 & ACFBPL   Center ...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Without a working auger and motor, your pellet stove is essentially useless. Now you can extend the life of your pellet stove with this feed shaft ...

Replacement Self-Adhesive Ash Door Gasket 1/8 x 3/4 x 47" for many PelPro pellet stoves.

LO LIMIT HEAT SENSORClose on temp rise @ 140°F. PHENOLIC, Includes spacers for surface or hole-airstream mounting.

Replacement Brass Spring Door Handle For Many PelPro Pellet Stoves. Fits the following units: FPP2BD FPPST4BD FPPBW2GD IPPBW2GD HHPP2BD HHPP32BD H...

Wire connector with 2 male spades and a Molex style connector.

Replacement High Limit Switch L250 for PelPro pellet stoves made by Dansons. PP3265

Burn Pot Super Grate for Pel Pro Pellet Stoves, KS-5080-1240 Fits all PelPro non-corn stoves made by Dansons.

Convection Blower Gasket for Pel Pro Pellet Stoves manufactured in 2013 and earlier.

Replacement High Limit Switch L250 for Pel Pro Pellet Stoves. This high limit switch fits PelPro pellet stoves made by Danson's. If the temperature...

Replacement Locking Collar For The Auger Shaft 5/8

Pel Pro Combustion Gasket for all PelPro pellet stoves manufactured before 2014, this gasket is for the exhaust blower KS-5020-1040.

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper

Replacement hopper lid safety switch fits models: Flat top, Step Top, Bayview & Home Heater 120/300

Replacement Vacuum Switch Kit Replaces part numbers: KS-5090-1310 and ACPRSW Fits all PelPro pellet stoves that use the Acutron control board.

This important safety device will monitor heat in the stove. 250F, includes spacers for surface hole mounting.

Replacement Convection/Room Air Blower With Gasket For Pel Pro Models manufactured in 2013 and earlier. Replaces previous part: ACCVFNAS

Exhaust Blower Complete with Housing #KS-5020-1040 This exhaust blower fits pellet stoves that were made by Danson's. Used in all PelPro models. Th...

Replacement PelPro main door handle assembly.Note: This product does not come with hardware, this listing is for the handle only.

Replacement Low Limit Switch F140 for many Pel Pro Pellet Stoves. This Low Limit Switch is also known as the Fan Control Limit Switch. The room air...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement side glass for PelPro Bayview models

Replacement Igniter Limit Switch 120° F for PelPro pellet stoves manufactured by Dansons.

Wire Stripper & Cutter Tool For Wire Sizes 10-22 AWG

Replacement door handle latch fits models Home Heater 120/300, Bayview, Flat Top & Step Top