PelPro PP70 Pellet Stove Repair and Replacement Parts

Replacement igniter for compatible PelPro pellet stoves. 110/120V AC. Measurement from hub 4 3/16″, Total Length of element 4 7/8″ 12″ Lead Wires

Replacement firepot with upgraded stainless steel construction for compatible PelPro pellet stoves.

Genuine original replacement igniter for compatible PelPro pellet stoves. 110/120V AC. Measurement from hub 4 3/16″, Total Length of element 4 7/8...

This is an OEM Replacement Convection Blower for Pelpro pellet stoves manufactured after August 2013. Includes Gasket.  Part Number: KS-5020-1052

Pel Pro Vacuum Switch SRV7000-531-AMP NO HOSE Compatible With The PP60, PP70, PP130, PPC90, and TSC90 Models Replaces part numbers: SRV7000-166 | 8...

Replacement ambient temperature sensor probe for compatible PelPro pellet stoves.

Replacement dial control for Pel Pro PP60, PP70 and PP130 pellet stove models. This controller is not used on the Pel Pro PPC90. Includes bracket, ...

Replacement Exhaust Probe for the following PelPro Pellet Stoves: PPC90, TSC90, PP60, PP130. Part Number: SRV7000-669

Hopper Lid Switch For Pel Pro Pellet Stoves, SRV7000-612 Fits the Following Pel Pro Models: PP60 PP70 PP130 PPC90 TSC90

Replacement Pel Pro Feed Motor, SRV7000-670

This is a replacement auger feed motor for select Pel-Pro pellet stoves. This particular motor runs at 2RPM and spins counter clockwise. The feed m...

Genuine original replacement ambient temperature sensor probe for compatible PelPro pellet stoves.

This bearing assembly is used on the SRV7000-659 convection blower. The oiled-brass bearing is designed to be maintenance-free (no lubrication requ...

Replacement 6" silicone gasket for between the combustion exhaust motor and the combustion exhaust motor housing.

Pel Pro Combustion/ Exhaust Blower Motor Housing Gasket

Replacement Exhaust Probe for the following PelPro Pellet Stoves: PPC90, TSC90, PP60, PP130. Part Number: SRV7000-669

This is an OEM Replacement Black Phenolic Door Handle For Pelpro Pellet Stoves. Part Number: KS-5140-1442

Replacement PelPro Snap Switch with manual reset button.

Pel Pro Vacuum Switch SRV7000-531-AMP With Hoses Compatible With The PP60, PP70, PP130, PPC90, & TSC90 Models Don't need the hoses? Buy the Af...

Replacement exhaust blower that works with select PelPro stoves. Its a "quick change" style with the gasket.**Typically does not require removal of...

Replacement door rope gasket for PelPro pellet stoves. Gasket measures 3/4" thick x 7' long.

Replacement Convection Blower GASKET for Pelpro pellet stoves manufactured after August 2013. Part Number: KS-5020-1052-GASKET

Pel Pro Feed Assembly Bushing, 7000-600 Dimensions: 3/4" (19mm) OD 1/2" (12mm) ID Sold Individually.

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement 5AMP Fuse for PelPro control boards

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Genuine original replacement firepot burnpot for compatible PelPro pellet stoves.

Genuine original replacement feeder assembly kit for compatible PelPro pellet stoves.Kit Includes: Auger Motor Auger Bearing Plates Auger Shaft Au...

Replacement black door handle assembly for Pel Pro models hardware included. SRV7093-024D

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

This is an OEM Replacement Glass Assembly for PelPro Pellet Stoves models: PP130 and PP60. Comes with gasket. This glass measures 12-1/2" x 9". Che...

Genuine original replacement feeder assembly kit for compatible PelPro pellet stoves.Kit Includes: Auger Motor Auger Bearing Plates Auger Shaft Au...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement PelPro Combustion Exhaust Blower with housing.

Replacement PelPro Snap Switch with manual reset button.

Replacement igniter chamber kit for the PP60/PP130 PPC90 & TSC90

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

This is the connection wire that goes between the motherboard and the dial controller for the  PP60, PP70, and PP130 pellet stove models.

Replacement 3 Prong Power Cord for PelPro PP60, PP70, PPC90 and PP130 pellet stoves.

Wire connector with 2 male spades and a Molex style connector.

Replacement Glass Assembly for PelPro Pellet Stoves models: PP130 and PP60.  This glass measures 12-1/2" x 9". Check your dimensions before purchas...

Replacement feed motor gasket for compatible PelPro pellet stoves.

The PelPro feed motor bracket is a replacement part that attaches the PelPro PP60 & PP90 pellet stove auger assemblies. This high quality brack...

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper

Replacement 3-Piece Baffle Kit Replacement for select Pel Pro Pellet Stoves. See compatible. Note: This part is improperly listed as fitting the ...

Exhaust Blower Complete with Housing #KS-5020-1040 This exhaust blower fits pellet stoves that were made by Danson's. Used in all PelPro models. Th...