Quadrafire Pumice Firebrick (8" x 4.5" x 1.25”): SRV7128-022

UPC: 652174958740

Replacement For Part Number:

• SRV7128-022

These are all of the confirmed compatible units for this product. This product may fit others, but these are the only ones we suggest ordering it for at this time.

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Quadrafire Pumice Firebrick (8" x 4.5" x 1.25”): SRV7128-022

Instructional Notes

Before removing any firebrick, please review the brick diagram for your model.

1.) Start off by laying out your new firebrick on the floor. It is helpful to lay out each side individually and compare it to the bricks inside the stove (i.e rear, right side, left side, bottom).

2.) Inspect the firebox to see if there are any brick retainers that need to be removed. If so remove them at this time.

3.) Remove the existing firebrick. Pay attention to how the bricks come out. Most of the time the firebricks on the side and rear need to be removed before the brick on the bottom can come out.

4.) Install the new firebrick. These bricks will be installed in the reverse order in which they were removed.

5.) Reinstall any previously removed retainers.

Troubleshooting Notes

Fire bricks help to protect the stove's firebox from damage caused by excessive heat. They also help to reflect and retain heat inside the stove. It is important that fire bricks are installed in the appliance and inspected on a regular basis. It is ok to have a few small cracks in the bricks. If you notice large cracks or missing pieces, the bricks should be replaced!

This Item Qualifies For Free Shipping With Orders Over $99!