Quadra-Fire 2100 & Discovery 1 Baffle Board Set of 2: SRV7039-111

Quadra-Fire

• 2100 Millennium ACC (opens in new tab)
• 2100 Millennium ACC-C (opens in new tab)
• Discovery I (opens in new tab)
• Discovery I-C (opens in new tab)

One of the most important elements in any wood stove is the baffle. Wood stove baffles offer a necessary layer of protection for your firebox. If the baffle is damaged or cracked it could cause the steel at the top of your firebox to warp.

To cut a baffle with a utility knife, firmly score along the desired cutting line with the sharp blade, applying consistent pressure and making multiple passes if necessary, then gently bend the baffle along the scored line to create a clean break; for thicker materials, you might need to score on both sides before bending to fully cut through.

Installation (May vary depending on model)

1.) Make sure the fire is completely out and your stove is cool to the touch.

2.) Open the main load door.

3.) Locate the retainer clip and bolt on the first reburn tube.

4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board.

5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).

6.) Remove the first 1-2 retainer clips and reburn tubes. Normally, this will give you enough room to remove the baffle.

7.) Slide the old baffle out and position the new baffle in its place. Make sure the new baffle is positioned correctly. If it is too far forward it may cause issues with the burn).

8.) Reinstall any previously removed tubes and retain clips.

9.) Close the door.

This Item Qualifies For Free Shipping!